Suzuki Grand Vitara SQ416/SQ420/420WD

since 1998 release

Repair and operation of the car


Suzuki Grand Vitara
+ General information
+ Maintenance and lubricant
+ Heater, ventilation and conditioner
+ Steering
+ Suspension bracket
+ Wheels and tires
+ Forward driving shaft / bearing of a shaft. Oil epiploon
+ Driveshafts
+ Brake system
+ Engines
+ Fuel system
+ System of ignition
+ System of start
+ System of release
- Transmissions
   + Mechanical transmission (type 1)
   + Mechanical transmission (type 2)
   - Automatic transmission (4 A/T)
      + General description
      + Diagnostics of the automatic transmission
      + Precautionary measures at diagnostics of malfunctions
      + Visual survey
      - Service out of a workshop
         Liquid level
         Liquid replacement
         Oil cooler hoses
         Cable of a throttle of the automatic transmission
         Manual selector
         Gear shifting cable
         Switch (sensor) of range of transmission
         The speed sensor at the exit of the automatic transmission
         Interruption switch on demand
         Solenoidal valves
         Switch of change of food \norm
         Oil cooler tubes
      + System of blocking of brakes
      + Check of system
+ Coupling
+ Transfer
+ Forward and back differentials
+ Windows, mirrors, locks and security measures. Immobilizer
+ Electric equipment

9df16362

Oil cooler tubes

Removal

 PERFORMANCE ORDER

    Lift the car. Wash away dirt from connections of tubes. Let's the engine cool down, weaken bolts of connecting oil tubes, having blocked an output oil branch pipe, and remove oil cooler tubes from output oil branch pipes and hoses.

In order to avoid leak of liquid remove face traffic jams of output oil branch pipes and hoses right after their detachment.

Installation

 PERFORMANCE ORDER

    Use new laying for branch pipes and connect oil cooler tubes to output oil branch pipes. Connect hoses to tubes and reliably fix by clips. Having blocked an output oil branch pipe, tighten branch pipe bolts to the specified value of the moment of an inhaling. Moment of an inhaling (a): 35 N • m (3.5 kg-m, 25.5 pounds feet). In case of use of laying with the basis from copper alloy (bronze color) (a): 25 N • m (2.5 kg-m, 18.0 pounds feet). In case of use of the steel laying (black color) covered with rubber. Reliably tighten a tube bolt. Check the level of liquid of the automatic transmission as it is described in the section "Liquid Level". Add if it is necessary. Having warmed the automatic transmission, check whether there is no liquid leak.
1 — oil cooler tubes
2 — laying of branch pipes
3 — a tube bolt