Suzuki Grand Vitara
+ General information
+ Maintenance and lubricant
+ Heater, ventilation and conditioner
+ Steering
+ Suspension bracket
+ Wheels and tires
+ Forward driving shaft / bearing of a shaft. Oil epiploon
+ Driveshafts
+ Brake system
+ Engines
+ Fuel system
+ System of ignition
+ System of start
+ System of release
- Transmissions
- Mechanical transmission (type 1)
Description of system
Diagnostics
- Service out of a workshop
Oil for the transmission
Gear shifting lever
Illumination switch
Back fixture of the engine
Removal of the transmission
Installation of the transmission
The case extender (for model with the drive on two wheels and the G16 and J20 engine)
Oil epiploon of the case extender (for model with the drive on two wheels and the G16 and J20 engine)
+ Mechanical transmission (type 2)
+ Automatic transmission (4 A/T)
+ Coupling
+ Transfer
+ Forward and back differentials
+ Windows, mirrors, locks and security measures. Immobilizer
+ Electric equipment
|
Oil epiploon of the case extender (for model with the drive on two wheels and the G16 and J20 engine)
Removal and installation
|
|
Remove the driveshaft as it is described in the Head Driveshafts, in the Section Driveshaft.
|
|
By means of the screw-driver remove an oil epiploon (1) from the case extender (2).
|
By means of the special tool (A) and the plastic hammer install a new oil epiploon (1) in the case extender (2) until the oil epiploon (1) does not concern a step part of the case extender (2). Do not forget to apply lubricant on edge of an oil epiploon. "A": lubricant 99000-25010. Special tool (A): 09951-16060.
Install the driveshaft as it is described in the Head Driveshafts, in the Section Driveshaft.
|
|
|
|
