Suzuki Grand Vitara SQ416/SQ420/420WD

since 1998 release

Repair and operation of the car

Suzuki Grand Vitara
+ General information
+ Maintenance and lubricant
+ Heater, ventilation and conditioner
+ Steering
+ Suspension bracket
+ Wheels and tires
+ Forward driving shaft / bearing of a shaft. Oil epiploon
+ Driveshafts
+ Brake system
- Engines
   + Mechanical part of the G16 engine
   + Mechanical part of the J20 engine
   - Cooling of the engine
      + General description
      + Diagnostics
      - Maintenance
         Check of level of cooling liquid
         Service and repair of the cooling system
         Washing and filling of the cooling system
         Regulation and check of a tension of a belt of the cooling fan
      + Routine maintenance of the vehicle
      Necessary service materials
      Technical characteristics of the rotating inhaling moment
+ Fuel system
+ System of ignition
+ System of start
+ System of release
+ Transmissions
+ Coupling
+ Transfer
+ Forward and back differentials
+ Windows, mirrors, locks and security measures. Immobilizer
+ Electric equipment

Maintenance

Check of level of cooling liquid

In order to avoid a burn:

Do not uncover the tank while cooling liquid "boils",

and

Do not uncover a radiator, the engine and a radiator still hot so far.

The burning liquid and steam can be splashed out under pressure if any of covers is removed too quickly.

PERFORMANCE ORDER

To check level, lift a cowl and look via the "transparent" tank of cooling liquid.

There is no need to uncover a radiator to check the level of cooling liquid. When the engine cools down, check the level of cooling liquid in the tank (1).

Normal level of cooling liquid has to be between the marks "FULL" and "LOW" in the tank. If the level of cooling liquid is lower than the mark "LOW" (3), uncover the tank and add the corresponding cooling liquid to the tank to bring the level of cooling liquid to the mark "FULL" (2). Then close a cover.

If antifreeze of the recommended quality is used, there is no need to add additional stabilizers or additives which as declare, improve system. They can do harm to the correct functioning of system.
At installation of a cover of the tank level arrows (4) on the tank and a cover.