Suzuki Grand Vitara + General information + Maintenance and lubricant + Heater, ventilation and conditioner + Steering - Suspension bracket + Forward suspension bracket - Back suspension bracket General description + Diagnostics - Service out of a workshop Shock-absorber Cylindrical spring Lower draft Top draft Side draft Zadny Bridge and bearing of a wheel Internal oil epiploon of the back bridge Case of the back bridge + Wheels and tires + Forward driving shaft / bearing of a shaft. Oil epiploon + Driveshafts + Brake system + Engines + Fuel system + System of ignition + System of start + System of release + Transmissions + Coupling + Transfer + Forward and back differentials + Windows, mirrors, locks and security measures. Immobilizer + Electric equipment
|
Lower draft
Removal
|
Lift the car and remove a back wheel.
|
Jack (2) prop up the case of the back bridge (1).
|
|
Remove a forward fixing bolt (2) of the lower draft (1).
|
|
Remove a back fixing bolt (2) of the lower draft (1).
|
|
|
Installation
|
Establish the lower draft (1) on a frame of the chassis (4) and the case of the bridge (5); the right direction of bolts at installation is shown in the drawing. Do not tighten a nut.
Remove a jack from under the case of the back bridge (5).
Establish a wheel and tighten wheel nuts to the specified value of the moment of an inhaling. Inhaling moment: wheel nuts — 100 N • m (10.0 kg-m, 72.5 pounds feet).
Lower the elevator and in not loaded condition of the car tighten a forward bolt (2) and a back nut (3) of the lower draft (1) to the specified value of the moment of an inhaling.
Inhaling moment:
forward bolt of the lower draft (a): 100 N • m (10.0 kg-m, 72.5 pounds feet)
back bolt of the lower draft (b): 90 N • m (9.0 kg-m, 65.0 pounds feet)
|
A — the Party of a body B — the Side of the bridge 1 — the lower draft 2 — a forward bolt 3 — back a nut 4 — a chassis frame 5 — cases of the back bridge 6 — the center of a body 7 — outer side of a body |
|
|
|
|