Suzuki Grand Vitara SQ416/SQ420/420WD

since 1998 release

Repair and operation of the car


Suzuki Grand Vitara
+ General information
+ Maintenance and lubricant
+ Heater, ventilation and conditioner
- Steering
   + Suspension bracket, wheels and tires
   + Adjustment of angles of installation of wheels of a forward suspension bracket
   + System of the power steering
   - Steering wheel and steering column
      + The steering wheel and a steering column which is not equipped with a safety cushion
      - A steering wheel and a steering column with a safety cushion
         General description
         + Diagnostics
         - Service out of a workshop
            + Precautionary measures at service
            The module (having inflated) the driver's pillows
            - Steering wheel
               The centering contact coil
            Contact coil and understeering switches
            Steering column (at not a cabriolet)
            The top shaft of steering (at not a cabriolet)
            Steering column (at a cabriolet)
            Steering lock (ignition switch)
            Lower shaft of steering
            Check of a steering column and top shaft of steering on existence of accident damages (at not a cabriolet)
            Check of a steering column on accident damages (at a cabriolet)
            Lever of an adjustable unblocking of a steering column
         Specifications of the moment of an inhaling
         Special tool
+ Suspension bracket
+ Wheels and tires
+ Forward driving shaft / bearing of a shaft. Oil epiploon
+ Driveshafts
+ Brake system
+ Engines
+ Fuel system
+ System of ignition
+ System of start
+ System of release
+ Transmissions
+ Coupling
+ Transfer
+ Forward and back differentials
+ Windows, mirrors, locks and security measures. Immobilizer
+ Electric equipment

9df16362

The centering contact coil

 PERFORMANCE ORDER

    Make sure that forward wheels of the car are directed directly forward. Make sure that the switch of ignition is in the provision of "LOCK". Slowly with easy effort turn the contact coil counterclockwise against the stop.

The contact coil can turn approximately at most on 5 turns that is when it is in the central situation, it can turn on two and a half turns on and counterclockwise.

    From this situation when the coil stopped and does not move further, turn it back clockwise approximately on two and a half turns and combine the central tag with the leveling tag (1).
    Turn slowly until the coil stops.
    2 — Not the cabriolet
    3 — the Cabriolet
    Turn the coil back approximately on 2.5 turns.

Installation

 PERFORMANCE ORDER

    Make sure that forward wheels of the car are directed directly forward, and the contact coil is in the central situation.

These two conditions are necessary for installation of a steering wheel. If to establish a steering wheel, without having met these conditions, the contact coil will break at turn of a steering wheel.

    Establish a steering wheel on a steering shaft, having got two teeth of the contact coil to two grooves on a back part of a steering wheel and having combined tags on a steering wheel and steering to a shaft. Tighten a nut of a steering shaft to the specified value of the moment of an inhaling. Inhaling moment: nut of a steering shaft (a): 33 N • m (3.3 kg-m, 23.5 pounds feet). Install the module (having inflated) safety cushions of the driver on a steering wheel. See in this Chapter the Section Module (having inflated) the driver's pillows.

Not cabriolet

1 — teeth
2 — grooves
3 — the leveling tags

Cabriolet

1 — teeth
2 — grooves
3 — the leveling tags