Suzuki Grand Vitara
+ General information
+ Maintenance and lubricant
+ Heater, ventilation and conditioner
- Steering
+ Suspension bracket, wheels and tires
+ Adjustment of angles of installation of wheels of a forward suspension bracket
+ System of the power steering
- Steering wheel and steering column
+ The steering wheel and a steering column which is not equipped with a safety cushion
- A steering wheel and a steering column with a safety cushion
General description
+ Diagnostics
- Service out of a workshop
+ Precautionary measures at service
The module (having inflated) the driver's pillows
+ Steering wheel
Contact coil and understeering switches
Steering column (at not a cabriolet)
The top shaft of steering (at not a cabriolet)
Steering column (at a cabriolet)
Steering lock (ignition switch)
Lower shaft of steering
Check of a steering column and top shaft of steering on existence of accident damages (at not a cabriolet)
Check of a steering column on accident damages (at a cabriolet)
Lever of an adjustable unblocking of a steering column
Specifications of the moment of an inhaling
Special tool
+ Suspension bracket
+ Wheels and tires
+ Forward driving shaft / bearing of a shaft. Oil epiploon
+ Driveshafts
+ Brake system
+ Engines
+ Fuel system
+ System of ignition
+ System of start
+ System of release
+ Transmissions
+ Coupling
+ Transfer
+ Forward and back differentials
+ Windows, mirrors, locks and security measures. Immobilizer
+ Electric equipment
|
Steering lock (ignition switch)
Removal
|
|
Remove a steering column (1). See in this Chapter Sections the Steering column (at not a cabriolet) and the Steering column (at a cabriolet).
|
|
By means of the center puncher (1), weaken and remove fixing bolts (2) helmsmen of the lock.
|
|
|
Be careful not to damage the puncher aluminum parts of the steering lock. |
Turn the ignition key in the provision of "ACC" or "ON" and remove the steering lock from a steering column.
|
|
Installation
|
|
Arrange an oblong opening of a steering shaft (2) in the middle of an opening in a column.
Turn the ignition key in the provision of "ACC" or "ON" and put the steering lock on a column
Now turn the ignition key in the provision of "LOCK" and take out from the lock.
Combine the lock plug with an oblong opening of a steering shaft and rotate a shaft to be convinced that it is blocked.
|
|
Tighten new bolts until at them heads do not break off.
|
Turn the ignition key in the provision of "ACC" or "ON" and check that the steering shaft rotates smoothly. Also check operation of the lock.
Establish a steering column as it is described in this Chapter in Sections the Steering column (at not a cabriolet) and the Steering column (at a cabriolet).
|
|
|
|
