Suzuki Grand Vitara SQ416/SQ420/420WD

since 1998 release

Repair and operation of the car



Suzuki Grand Vitara
+ General information
+ Maintenance and lubricant
+ Heater, ventilation and conditioner
- Steering
   + Suspension bracket, wheels and tires
   + Adjustment of angles of installation of wheels of a forward suspension bracket
   - System of the power steering
      + Main description
      - Diagnostics
         General diagnostic table
         + Steering wheel
         + Power steering liquid
         - Driving belt of the pump of the power steering
            Check of a tension of a belt
            Adjustment of a tension of a belt
         + System of idling
         + Liquid
         + Hydraulic pressure in the GUR system
         + Protective covers
         Procedure of a razvozdushivaniye of system
   + Steering wheel and steering column
+ Suspension bracket
+ Wheels and tires
+ Forward driving shaft / bearing of a shaft. Oil epiploon
+ Driveshafts
+ Brake system
+ Engines
+ Fuel system
+ System of ignition
+ System of start
+ System of release
+ Transmissions
+ Coupling
+ Transfer
+ Forward and back differentials
+ Windows, mirrors, locks and security measures. Immobilizer
+ Electric equipment


9df16362

Adjustment of a tension of a belt

For the G16 engine

For the G16 engine with the conditioner

1 — a pulley of the pump of the hydraulic booster
2 — a conditioner compressor pulley (if it is equipped)
3 — a pulley of a bent shaft

For the G16 engine without conditioner

1 — a pulley of the pump of the hydraulic booster
3 — a pulley of a bent shaft


 PERFORMANCE ORDER

    To adjust a tension of a driving belt of the power steering, use an adjusting bolt on the conditioner compressor on the cars equipped with the conditioner and on the pump of the hydraulic booster on cars without conditioner. Adjust a belt tension according to the above-stated specification. Then tighten adjusting and fixing bolts according to the moment.

For the J20 engine

For adjustment of a tension of a driving belt of the hydraulic booster see the Section Generator Belt in the Head Sistema of electric equipment. Inhaling moments: pulley bolts — 25 N • m (25 kg-m, 18,5 pound on foot).