Suzuki Grand Vitara
+ General information
+ Maintenance and lubricant
+ Heater, ventilation and conditioner
+ Steering
+ Suspension bracket
+ Wheels and tires
+ Forward driving shaft / bearing of a shaft. Oil epiploon
+ Driveshafts
+ Brake system
+ Engines
+ Fuel system
+ System of ignition
+ System of start
+ System of release
+ Transmissions
+ Coupling
- Transfer
General description
+ Diagnostics
- Service out of a workshop
Oil of the transfer case
Gear shifting lever
Switch of transfer of the all-wheel drive car
+ Oil epiploons of transfer
Speed sensor
Back fixture of the engine
Transfer module
Removal
Installation
+ Forward and back differentials
+ Windows, mirrors, locks and security measures. Immobilizer
+ Electric equipment
|
Service out of a workshop
Oil of the transfer case
Check and replacement
|
|
Before check and replacement of oil switch off the engine and lift the car horizontally.
At the lifted car check the level of liquid and leak. If leak is found, adjust or eliminate it.
Chart of viscosity of SAE (society of automobile engineers of the USA)
Merge old oil, having removed a drain stopper (1).
|
|
- Check every time when raising the car for any service whether there is no oil leak, and a condition of hoses of a sapun.
- If in the merged oil there is water or impurity of a rust, check a hose of a sapun and a casing of transfer.
|
Fill in the new specified oil, up to the specified volume (to a-level opening).
|
|
It is very much recommended to use oil for transfer of SAE 75 W-90. |
The specification of oil for transfer:
oil brand: API GL-4
viscosity: SAE 75 W-85, 75 W-90 or 80 W-90
oil volume: 1.7 liter (3.6/3.0 USA/Imp. pints)
Tighten a drain stopper (1) and a-level/filling stopper (2) to the specified value of the moment of an inhaling, having applied previously on a carving of traffic jams (1 and 2) sealant. "A": sealant 99000-31110. Moment of an inhaling (a): 23 N • m (2.3 kg-m, 17.0 pounds feet).
|
|
1 — a drain stopper
2 — a-level/filling stopper
3 — the transfer case |
|
|
|
|
