Table of codes of diagnostics of malfunctions (DTC) (Code of automatic transmission)
|
Number of a code of malfunction (DTC)
|
The found malfunction
|
|
With the scanning tool
|
Without the scanning tool
|
|
—
|
12
|
—
|
|
P0705
|
72
|
Malfunction of the scheme of the sensor of provision of transfer
|
|
P0715
|
76
|
Malfunction of the scheme of the sensor of speed of the leading shaft / turbine
|
|
P0720
|
75
|
Malfunction of the scheme of the sensor of speed at the exit
|
|
* 1
P0741
|
It is not applied
|
Work or jamming of the TSS solenoid (blocking)
|
|
P0743
|
65
66
|
TSS electric solenoid (blocking)
|
|
* 1
P0751
|
It is not applied
|
Work or jamming of the solenoid pereklyucheniya-A (No. 1)
|
|
P0753
|
61
62
|
Electric solenoid pereklyucheniya-A (No. 1)
|
|
* 1
P0756
|
Not primas.
|
Work or jamming of the solenoid pereklyucheniya-V (No. 2)
|
|
P0758
|
63
64
|
Electric solenoid pereklyucheniya-V (No. 2)
|
|
* 1
P1875
|
It is not applied
|
Malfunction of the scheme of the lower switch of the four-wheel drive
|
|
The defined state
|
Malfunction indicator
|
|
The car without socket for the monitor
|
The car with the socket for the monitor
|
|
There are no problems
|
—
|
—
|
|
At the same time on an entrance many signals or not a signal are given at the movement at a speed of 60 km/h or more.
|
2 motion cycles
|
It is not applied
|
|
Speed of rotation of the leading shaft below the specified value at the movement of the car with transfer in situation "D" and the specified speed of the engine or above.
|
2 motion cycles
|
1 motion cycle
|
|
The speed sensor signal at the exit does not arrive though the signal of speed of the car arrives.
|
2 motion cycles
|
1 motion cycle
|
|
Real work of TSS will not be coordinated with the management of function ON/OFF going from the block of electronic control to TSS.
|
2 motion cycles
|
It is not applied
|
|
On the monitor the signal OFF when the solenoid of management of TSS is switched on is defined, or on the monitor the signal INCL. is defined when it is switched off.
|
1 motion cycle
|
1 motion cycle
|
|
The management of gear shifting going from an electronic control unit (RSM) to the automatic transmission (AT) will not be coordinated with the real situation of transfer of the automatic transmission.
|
2 motion cycles
|
It is not applied
|
|
On the monitor the signal OFF when the solenoid pereklyucheniya-A is switched on (No. 1) is defined, or on the monitor the signal INCL. is defined when it is switched off.
|
1 motion cycle
|
1 motion cycle
|
|
The management of gear shifting going from an electronic control unit (RSM) to the automatic transmission (AT) will not be coordinated with the real situation of transfer of the automatic transmission.
|
2 motion cycles
|
It is not applied
|
|
On the monitor the signal OFF when the solenoid pereklyucheniya-V is switched on (No. 2) is defined, or on the monitor the signal INCL. is defined when it is switched off.
|
1 motion cycle
|
1 motion cycle
|
|
The difference between the speed of the car determined by the sensor of speed of the car (VSS), and the speed of the car, determined by the speed sensor at the exit and compensated by the lower switch of the four-wheel drive is more specified in the specification.
|
2 motion cycles
|
It is not applied
|
* 1: It is applied only on the car without socket to the monitor.
