Suzuki Grand Vitara SQ416/SQ420/420WD

since 1998 release

Repair and operation of the car

Suzuki Grand Vitara
+ General information
+ Maintenance and lubricant
+ Heater, ventilation and conditioner
+ Steering
+ Suspension bracket
+ Wheels and tires
+ Forward driving shaft / bearing of a shaft. Oil epiploon
+ Driveshafts
+ Brake system
+ Engines
+ Fuel system
- System of ignition
   - System of ignition for the G16 engine
      + General description
      + Diagnostics
      - Service of the vehicle
         Check of a spark of ignition
         Check of time of an advancing of ignition
         Wire of high voltage
         Assembly of the coil of ignition (igniter and coil of ignition)
         Spark plug
         The resistor an ignition advancing (if it is established)
         CMP sensor
         Noise suppressor
      Specification, torque of an inhaling
      Special tool
   + System of ignition for the J20 engine
+ System of start
+ System of release
+ Transmissions
+ Coupling
+ Transfer
+ Forward and back differentials
+ Windows, mirrors, locks and security measures. Immobilizer
+ Electric equipment

Noise suppressor

Removal

PERFORMANCE ORDER

Switch-off the coupling of the noise suppressor (1). Remove the noise suppressor (1).

1 — the noise suppressor
2 — an assembly plait of the engine

Survey

Using an ohmmeter, check and be convinced that the condenser in the noise suppressor does not carry current.

If result of check not satisfactory, replace the noise suppressor.

Installation

For installation, carry out the procedure of removal upside-down.