Suzuki Grand Vitara
+ General information
+ Maintenance and lubricant
+ Heater, ventilation and conditioner
+ Steering
+ Suspension bracket
+ Wheels and tires
+ Forward driving shaft / bearing of a shaft. Oil epiploon
+ Driveshafts
+ Brake system
+ Engines
+ Fuel system
- System of ignition
- System of ignition for the G16 engine
+ General description
+ Diagnostics
- Service of the vehicle
Check of a spark of ignition
Check of time of an advancing of ignition
Wire of high voltage
Assembly of the coil of ignition (igniter and coil of ignition)
Spark plug
The resistor an ignition advancing (if it is established)
CMP sensor
Noise suppressor
Specification, torque of an inhaling
Special tool
+ System of ignition for the J20 engine
+ System of start
+ System of release
+ Transmissions
+ Coupling
+ Transfer
+ Forward and back differentials
+ Windows, mirrors, locks and security measures. Immobilizer
+ Electric equipment
|
Assembly of the coil of ignition (igniter and coil of ignition)
Removal
|
|
Switch-off the ignition coil coupling.
|
|
Disconnect a wire of high voltage (3) from the coil of ignition (2).
|
Remove a bolt of the coil of ignition (1), and then extend coils of ignition (2).
|
|
Survey
|
|
Check whether is not present for damages, permission and corrosion of conclusions. If result of check unsatisfactory, replace the coil of ignition (1). |
Installation
|
|
|
|
Install the coil of ignition (2).
|
Tighten a bolt of the coil of ignition (1), and then connect the ignition coil coupling.
Connect a wire of high voltage (3) to the coil of ignition (2), holding its cap.
|
|
|
|
