Suzuki Grand Vitara SQ416/SQ420/420WD

since 1998 release

Repair and operation of the car


Suzuki Grand Vitara
+ General information
+ Maintenance and lubricant
+ Heater, ventilation and conditioner
+ Steering
+ Suspension bracket
+ Wheels and tires
+ Forward driving shaft / bearing of a shaft. Oil epiploon
+ Driveshafts
+ Brake system
+ Engines
+ Fuel system
+ System of ignition
+ System of start
+ System of release
+ Transmissions
+ Coupling
+ Transfer
- Forward and back differentials
   + Forward diffrentsiat
   - Back differential
      General description
      Diagnostics
      - Service out of a workshop
         - Servicing
            Oil replacement
         Removal
         Installation
      Specifications of the moment of an inhaling
      Material, necessary for service
+ Windows, mirrors, locks and security measures. Immobilizer
+ Electric equipment

9df16362

Oil replacement

  • For differential it is necessary to use gipoidny oil for lubricant of gear wheels.
  • It is strongly recommended to use viscosity of 75 W-90 SAE (Societies of automobile engineers of the USA).

 PERFORMANCE ORDER

    Before replacement or check of oil, stop the engine and lift the car horizontally. Check the level of oil and existence of leak. If leak is found, remove its cause.
    Merge old oil and fill in necessary quantity new, as shown below (approximately to a-level opening).
    Tighten drain and-level/bulk traffic jams to the specified value of the moment of an inhaling. "A": sealant 99000-31110.
      Inhaling moment
        (a): 50 N • m (5.0 kg-m, 36.5 pounds feet) (b): 28 N • m (2.8 kg-m, 20.5 pounds feet)
1 — a hose of a sapun
2 — a-level/bulk stopper for oil
3 — a back drain stopper (apply sealant)
      The specified oil for gear wheels:
        gipoidny API GL-5 SAE 80 W-90 or 90 oil viscosity of oil see on the chart at the left oil volume: 2.2 liter (4.6/3.9 USA/Imp. pints)