Suzuki Grand Vitara SQ416/SQ420/420WD

since 1998 release

Repair and operation of the car



Suzuki Grand Vitara
+ General information
+ Maintenance and lubricant
+ Heater, ventilation and conditioner
+ Steering
+ Suspension bracket
+ Wheels and tires
+ Forward driving shaft / bearing of a shaft. Oil epiploon
+ Driveshafts
+ Brake system
+ Engines
+ Fuel system
+ System of ignition
+ System of start
+ System of release
+ Transmissions
+ Coupling
+ Transfer
- Forward and back differentials
   - Forward diffrentsiat
      + General description
      + Diagnostics
      - Service out of a workshop
         + Servicing
         + Check
         + Removal and installation
         Removal
         Installation
   + Back differential
+ Windows, mirrors, locks and security measures. Immobilizer
+ Electric equipment


9df16362

Removal

 PERFORMANCE ORDER

    Lift the car and merge oil. Disconnect air hoses a hose of a sapun from the differential case. Before to remove the driveshaft, apply the leveling tags on a flange of connection and the driveshaft.
And — the leveling tags
    Remove a driveshaft flange, having removed 4 its bolts and suspend it on a rope or something similar.

In case of pulling of the driveshaft previously it is necessary to merge transfer oil.

    Remove 3 bolts of the left fixing arm and 3 bolts of a flange of a power shaft to release the left side of differential.
1 — a bolt of a fixing arm
2 — a flange bolt and a nut
    Remove 2 bolts of a cross-piece to release back fixture of differential.
1 — bolts
    For back fixture of vtulkovy type remove bolts and a back fixing arm. For back fixture of vtulkovy type remove bolts and a back fixing arm No. 2.
1 — a back fixing bolt
2 — a bolt of a back fixing arm
3 — a back fixing arm
4 — a bolt of a back fixing arm No. 2
5 — a back fixing arm No. 2
    Having propped up the differential case a transmission jack, remove fixing bolts on the right side of the case.
1 — a bolt of a fixing arm
2 — a fixing arm of R
3 — the differential case
    Using two big screw-drivers as levers, pull out the right side of a power shaft from differential and remove the case from the car.

During this work be careful not to damage a casing of a power shaft.


1 — connection of a power shaft of R
2 — the differential case
3 — a transmission jack
4 — the screw-driver