Suzuki Grand Vitara
+ General information
+ Maintenance and lubricant
+ Heater, ventilation and conditioner
+ Steering
+ Suspension bracket
+ Wheels and tires
+ Forward driving shaft / bearing of a shaft. Oil epiploon
+ Driveshafts
+ Brake system
+ Engines
+ Fuel system
+ System of ignition
+ System of start
+ System of release
+ Transmissions
+ Coupling
+ Transfer
- Forward and back differentials
- Forward diffrentsiat
+ General description
+ Diagnostics
- Service out of a workshop
+ Servicing
+ Check
- Removal and installation
Differential accessories
Removal
Installation
+ Back differential
+ Windows, mirrors, locks and security measures. Immobilizer
+ Electric equipment
|
Removal and installation
Differential accessories
|
|
Lift the car and turn a steering wheel to the right.
Separate a fixing arm of R from the differential case, having removed bolts from its lower part.
Remove a fixing arm of R, having removed a forward fixing bolt from its top part.
|
|
1 — a fixing bolt of an arm
2 — a fixing arm of R
3 — the differential case |
|
|
2 — a fixing arm of R
3 — the differential case
4 — a forward fixing bolt |
Remove a fixing arm of L, having removed the top and lower fixing bolts.
|
|
1 — the differential case
2 — a forward fixing bolt
3 — a fixing arm of L
4 — a bolt of a fixing arm |
Check a condition of each plug. If it is damaged or spoiled, pull out it the special tool and a hydraulic press and replace.
Special tool
(a): 09951-26010
(b): 09951-16080
At installation on the press arrange a vent in each plug.
|
|
1 — a fixing arm of L
2 — the plug
3 — a fixing arm of R
And — alignment of a vent 45 ° |
Arrange each plug on an arm. Length of "a": 3.0 mm (0.12 inches).
|
|
1 — a fixing arm of R
2 — a fixing arm of L |
|
|
At installation observe the following values of the moment of an inhaling:
Inhaling moment
(a): 85 N • m (8.5 kg-m, 61.5 pounds feet)
(b): 50 N • m (5.0 kg-m, 36.5 pounds feet)
|
|
|
Back fixture (for the holder of forward differential)
Integral type
|
|
Lift the car and remove a fixing design, having removed two bolts and nuts from the holder of differential and 2 bolts and nuts from a cross-piece.
Check fixing rubber for damages and deterioration in a state and replace if necessary.
At installation observe the following value of the moment of an inhaling. Moment of an inhaling (a): 50 N • m (5.0 kg-m, 36.5 pounds feet).
|
|
1 — a bolt and a nut of a back fixing arm
2 — the holder of differential
3 — a cross-piece
4 — a bolt of a back fixing arm
5 — back fixture of differential |
|
|
Type with the plug
|
|
Lift the car and remove a back fixing arm, having removed a back fixing bolt and bolts of a back fixing arm.
Check fixing rubber for damages and deterioration in a state and replace if necessary.
At installation tighten back fixing bolts and bolts of a back fixing arm to the specified value of the moment of an inhaling.
Inhaling moment:
back fixing bolt (a): 85 N • m (8.5 kg-m, 61.5 pounds feet)
bolts of a back fixing arm (b): 50 N • m (5.0 kg-m, 36.5 pounds feet)
|
|
1 — a back fixing bolt
2 — a bolt of a back fixing arm
3 — a back fixing arm |
|
|
|
|
