Audi 100/A6

1990-1997 of release

Repair and car operation

Audi 100/A6
+ 1. The maintenance instruction
+ 2. Maintenance service
+ 3. Engines
+ 3.2. Diesel engines
+ 3.3. Removal and a partition of engines
+ 4. Cooling system
+ 5. Heating and ventilation
+ 6. Fuel system
+ 7. An exhaust system
+ 8. Systems of start, ignition
+ 9. Transmission
+ 10. Brake system
- 11. Suspension brackets, a steering
   11.2. Technical characteristics
   11.3. The general description of adjustment of wheels
   - 11.4. A forward suspension bracket
      11.4.2. A rack of a forward suspension bracket
      11.4.3. Shock-absorbers of a forward suspension bracket
      11.4.4. The bottom lever of a forward suspension bracket
      11.4.5. The stabilizer of cross-section stability of a forward suspension bracket
      11.4.6. A cross-beam of a forward suspension bracket
   + 11.5. A back suspension bracket
   + 11.6. A steering
   + 11.7. Semiaxes
   11.8. Easily and easy
   11.9. Maintenance service of system of a steering
   11.10. Diagnostics of malfunctions of system of a steering
+ 12. A body
+ 13. An electric equipment
+ 14. A good advice

Lancia Musa - про автомобиль Lancia Musa

11.4.4. The bottom lever of a forward suspension bracket Removal

PERFORMANCE ORDER

1. Remove the stabilizer of cross-section stability.

2. Remove a corresponding forward wheel.

3. Turn off a nut and remove a bolt of fastening of the lever to a suspension bracket rack.

4. Turn off and remove an internal fixing bolt of the lever.

5. Remove the lever from the car.

Repair

PERFORMANCE ORDER

1. Clear the lever and examine it on presence of cracks, deformation or damages. If the lever or the spherical hinge is damaged, it is necessary to replace the lever.

2. For replacement of the plug of internal fastening it is necessary to use a hydraulic press and a set of washers. At replacement of the plug of fastening establish the new plug so that and = 4,5 0,8 mm.

Installation

Installation is spent upside-down removals.

PERFORMANCE ORDER

Tighten fixing nuts till the demanded moment of an inhaling. Check up correctness of installation of a washer (it is specified by an arrow) a bolt of internal fastening and tighten a fixing bolt till the demanded moment of an inhaling.