Audi 100/A6
1990-1997 of release
Repair and car operation
Audi 100/A6
+
1. The maintenance instruction
+
2. Maintenance service
+
3. Engines
+
3.2. Diesel engines
+
3.3. Removal and a partition of engines
+
4. Cooling system
+
5. Heating and ventilation
+
6. Fuel system
+
7. An exhaust system
+
8. Systems of start, ignition
+
9. Transmission
+
10. Brake system
-
11. Suspension brackets, a steering
11.2. Technical characteristics
11.3. The general description of adjustment of wheels
+
11.4. A forward suspension bracket
-
11.5. A back suspension bracket
11.5.2. Bearings of a nave of a back wheel
11.5.3. A pin of a back wheel
11.5.4. A rack of a back suspension bracket
11.5.5. Cross-section draught of a back suspension bracket
11.5.6. The stabilizer of cross-section stability of a back suspension bracket
11.5.7. A cross-beam of a back suspension bracket
11.5.8. System of adjustment of height of a back suspension bracket
11.5.9. Elements of system of adjustment of height of a back suspension bracket
+
11.6. A steering
+
11.7. Semiaxes
11.8. Easily and easy
11.9. Maintenance service of system of a steering
11.10. Diagnostics of malfunctions of system of a steering
+
12. A body
+
13. An electric equipment
+
14. A good advice
Lancia Flavia - про автомобиль Lancia Flavia
11.5. A back suspension bracket
11.5.1. A nave of a back wheel
THE GENERAL DATA
MODELS WITH BACK DRUM-TYPE BRAKES
The nave is a part of a brake drum. Look
subsection 10.10
.
MODELS WITH BACK DISK BRAKES
Removal
PERFORMANCE ORDER
1.
Remove a brake disk.
2.
Remove a cap from the nave centre.
3.
Remove to the check and a lock cap.
4.
Turn off a fixing nut.
5.
Remove a washer and the external bearing from a nave.
6.
Remove a nave.
Installation
Installation is spent upside-down removals.
PERFORMANCE ORDER
1.
Twirl a fixing nut of a nave so that the washer could be moved easily a screw-driver.
2.
Establish a lock cap and new to the check for nut fixing.
3.
Establish a protective cap.
