Audi 100/A6

1990-1997 of release

Repair and car operation



Audi 100/A6
+ 1. The maintenance instruction
+ 2. Maintenance service
+ 3. Engines
+ 3.2. Diesel engines
+ 3.3. Removal and a partition of engines
+ 4. Cooling system
+ 5. Heating and ventilation
+ 6. Fuel system
+ 7. An exhaust system
+ 8. Systems of start, ignition
+ 9. Transmission
- 10. Brake system
   + 10.1.2. Shock-absorbers
   + 10.2. Technical characteristics
   10.3. Prorolling of hydraulic system
   10.4. Hydraulic tubes and hoses
   10.5. Brake overlays of forward brakes
   10.6. Brake overlays of back wheels
   10.7. Brake Pads back brakes
   10.8. A brake disk of a forward wheel
   10.9. A brake disk of a back wheel
   10.10. A brake drum of a back brake
   10.11. A support of a forward brake
   10.12. A support of a back brake
   10.13. The wheel cylinder of a back brake
   10.14. The main brake cylinder
   10.15. A brake pedal
   10.16. The vaakuumnyj amplifier
   10.17. The vacuum valve of a servoamplifier
   10.18. A rope of a manual brake
   10.19. The lever of a manual brake
   10.20. The valve of adjustment of pressure in a contour of back brakes (till 96 of century)
   10.21. The switch of fires of a stoplight
   10.22. The general description of system of antiblocking of brakes (ABS)
   10.23. System ABS elements
   10.24. The vacuum pump (diesel and petrol engines in volume 2,3)
+ 11. Suspension brackets, a steering
+ 12. A body
+ 13. An electric equipment
+ 14. A good advice



10.10. A brake drum of a back brake

Removal

PERFORMANCE ORDER
1. Remove a back wheel.
2. Remove a cap from the centre of a brake drum.
3. Remove to the check and a lock cap.
4. Turn off a nut of fastening of a nave, remove a washer and the external bearing.
5. Remove a brake drum. If brake Pads interfere with removal of a brake drum, execute following operations.
6. Loosen the a tension of a rope of a manual brake.
7. By means of a screw-driver lift клинышек (marksman) that Pads have departed from a drum.

Survey

PERFORMANCE ORDER
Clear a brake drum and examine it on presence of damages or deterioration. Measure internal diameter of a drum in several points. Repair or replace a brake drum if it is necessary.

Installation

Installation is spent upside-down removals.