Suzuki Grand Vitara
+ General information
+ Maintenance and lubricant
+ Heater, ventilation and conditioner
- Steering
+ Suspension bracket, wheels and tires
+ Adjustment of angles of installation of wheels of a forward suspension bracket
+ System of the power steering
- Steering wheel and steering column
+ The steering wheel and a steering column which is not equipped with a safety cushion
- A steering wheel and a steering column with a safety cushion
General description
+ Diagnostics
- Service out of a workshop
+ Precautionary measures at service
The module (having inflated) the driver's pillows
+ Steering wheel
Contact coil and understeering switches
Steering column (at not a cabriolet)
The top shaft of steering (at not a cabriolet)
Steering column (at a cabriolet)
Steering lock (ignition switch)
Lower shaft of steering
Check of a steering column and top shaft of steering on existence of accident damages (at not a cabriolet)
Check of a steering column on accident damages (at a cabriolet)
Lever of an adjustable unblocking of a steering column
Specifications of the moment of an inhaling
Special tool
+ Suspension bracket
+ Wheels and tires
+ Forward driving shaft / bearing of a shaft. Oil epiploon
+ Driveshafts
+ Brake system
+ Engines
+ Fuel system
+ System of ignition
+ System of start
+ System of release
+ Transmissions
+ Coupling
+ Transfer
+ Forward and back differentials
+ Windows, mirrors, locks and security measures. Immobilizer
+ Electric equipment
|
Contact coil and understeering switches
|
|
Do not turn the contact coil (on understeering switches) on more, than admissible speed (about two and a half turns from the central situation on and counterclockwise respectively), differently the coil will break. |
Removal
|
|
Remove a steering wheel from a steering column. See in this Chapter Undressed the Steering wheel.
Uncover an opening of a steering column (1).
Uncover bolts (1) of a steering column (3 pieces).
Divide the top cover (2) and the lower cover (3), then remove them.
Disconnect all cables of the contact coil and understeering switches.
|
|
A — Not the cabriolet
B — the Cabriolet |
Remove the contact coil and understeering switches (1) from a steering column.
Not cabriolet
Cabriolet
|
|
1 — the contact coil and understeering switches
2 — a bolt |
Check wires of the contact coil and understeering switches for existence of an oplavleniye or other damages. If damages are found, wires should be replaced.
|
|
A — Not the cabriolet
B — the Cabriolet
1 — the contact coil and understeering switches |
|
|
Installation
|
|
Make sure that forward wheels of the car are directed directly forward, and the switch of ignition is in the provision of "LOCK".
Install the contact coil and understeering switches on a steering column.
|
|
The new contact coil and understeering switches is completed with a set of the coil and is kept in the central situation by a lock pin and a sealant. Having installed the contact coil and understeering switches on a steering column, remove this lock pin. |
|
|
A — Not the cabriolet
B — the Cabriolet
1 — a sealant (if is available, remove a lock pin after installation of the contact coil and understeering switches)
2 — a lock pin (if is available, remove a lock pin after installation of the contact coil and understeering switches) |
Connect all cables disconnected at removal.
Establish top (2) and the lower (3) covers of a steering column, then tighten bolts (1) of a cover of a steering column.
|
|
At installation of the top and lower covers pay attention to that between them wires of the contact coil and understeering switches did not get. |
|
|
A — Not the cabriolet
B — the Cabriolet
* — standard bolt
** — bolt self-tapping screw |
Establish a cover of an opening of a steering column (1).
Establish a steering wheel on a steering column. See in this Chapter Undressed the Steering wheel.
Not cabriolet
|
|
1 — a cover of an opening of a steering column |
Cabriolet
|
|
1 — a cover of an opening of a steering column |
|
|
|
|
