Suzuki Grand Vitara
+ General information
+ Maintenance and lubricant
+ Heater, ventilation and conditioner
- Steering
+ Suspension bracket, wheels and tires
+ Adjustment of angles of installation of wheels of a forward suspension bracket
+ System of the power steering
- Steering wheel and steering column
+ The steering wheel and a steering column which is not equipped with a safety cushion
- A steering wheel and a steering column with a safety cushion
General description
+ Diagnostics
- Service out of a workshop
+ Precautionary measures at service
The module (having inflated) the driver's pillows
+ Steering wheel
Contact coil and understeering switches
Steering column (at not a cabriolet)
The top shaft of steering (at not a cabriolet)
Steering column (at a cabriolet)
Steering lock (ignition switch)
Lower shaft of steering
Check of a steering column and top shaft of steering on existence of accident damages (at not a cabriolet)
Check of a steering column on accident damages (at a cabriolet)
Lever of an adjustable unblocking of a steering column
Specifications of the moment of an inhaling
Special tool
+ Suspension bracket
+ Wheels and tires
+ Forward driving shaft / bearing of a shaft. Oil epiploon
+ Driveshafts
+ Brake system
+ Engines
+ Fuel system
+ System of ignition
+ System of start
+ System of release
+ Transmissions
+ Coupling
+ Transfer
+ Forward and back differentials
+ Windows, mirrors, locks and security measures. Immobilizer
+ Electric equipment
|
The module (having inflated) the driver's pillows
|
|
During the work with the module (naduvy) cm safety cushions. preventions at the beginning of this Chapter also observe all instructions. Non-compliance with instructions can lead to damage of the module (naduv) of a safety cushion or cause a trauma. |
Removal
|
|
Disconnect "minus" a battery cable.
Disconnect system of a safety cushion. cm. preventions at the beginning of this Chapter.
Weaken 2 bolts (1) fixing the module (having inflated) safety cushions of the driver until it does freely not turn, take out them and record in clips.
Remove the module (having inflated) safety cushions from a steering wheel.
Remove from a steering wheel a cable (1) of the module (naduv) of a safety cushion of the driver (yellow) and a cable (2) of a sound signal.
Disconnect a cable of the module (naduv) of a safety cushion of the driver (yellow) and a cable of a sound signal.
Remove blocking of the lever or release the blocking button.
After an unblocking disconnect a cable.
|
|
At the address and storage of the "live" (not worked) module (naduv) of a safety cushion extra care is necessary. See preventions at the beginning of this Chapter. Otherwise, injuries are possible. |
Cabriolet
|
|
1 — a cable of the module (naduv) of a pillow
2 — a cable of a sound signal |
|
|
Survey
|
|
Never disassemble the module (having inflated) safety cushions and do not check its durability. Otherwise it is possible to be traumatized. |
|
|
If the module (having inflated) safety cushions to drop from height of 90 cm (3 feet) or more, it needs to be replaced. |
Check the module (having inflated) safety cushions visually, and replace it new if you find any of the following:
The safety cushion worked.
Finishing covering (slip surface) (1) it is burst.
Wires (3) or plugs are damaged.
The module (having inflated) safety cushions (2) it is damaged or had strong blow (falling).
Not cabriolet
|
|
1 — a finishing covering (a slip surface)
2 — a case of a naduv |
Cabriolet
|
|
1 — a finishing covering (a slip surface)
2 — a case of a naduv
3 — wires |
Installation
|
|
Reliably connect the socket (2) of a sound signal.
Reliably connect the yellow socket of a cable of the module (naduv) of a safety cushion of the driver (1).
Connect a cable.
Block the socket the lever or the button of blocking.
Install the socket of a sound signal and the socket of the module (naduv) of a safety cushion of the driver.
Install the module (having inflated) safety cushions of the driver (3) on a steering wheel (4), paying attention to that no wires got between them.
Make sure that the gap between the module and a steering wheel is identical everywhere.
At first tighten a fixing bolt (on the left side) (5) modules (naduv) of a safety cushion of the driver to the specified value of the moment of an inhaling, then a fixing bolt (on the right side) (6) modules (naduv) of a safety cushion of the driver to the specified value of the moment of an inhaling. Inhaling moment: a fixing bolt of the module (naduv) of a safety cushion of the driver — 9 N • m (0.9 kg-m, 6.5 pounds feet).
Connect "minus" a battery cable.
Include system of a safety cushion. See preventions at the beginning of this Chapter.
|
|
|
|
