Audi 100/A6
+ 1. The maintenance instruction
+ 2. Maintenance service
+ 3. Engines
- 3.2. Diesel engines
+ 3.2.1.2. Technical characteristics
- 3.2.2. 5-cylinder engines
3.2.2.2. Technical characteristics
3.2.2.3. Sinhronizatsionnye labels timing
3.2.2.4. Compression check
3.2.2.5. A gazoraspredelitelnyj belt
3.2.2.6. A privodnoj belt of the fuel pump
3.2.2.7. Натяжитель газораспределительного a belt and an asterisk
3.2.2.8. Additional приводной a belt
3.2.2.9. A camshaft cover
3.2.2.10. Camshaft epiploons
3.2.2.11. Epiploons of a cranked shaft
3.2.2.12. A head of cylinders
3.2.2.13. Hydraulic pushers
3.2.2.14. A flywheel
3.2.2.15. Engine fastenings
3.2.2.16. The oil pallet
3.2.2.17. The oil pump and маслозаборный a branch pipe
+ 3.3. Removal and a partition of engines
+ 4. Cooling system
+ 5. Heating and ventilation
+ 6. Fuel system
+ 7. An exhaust system
+ 8. Systems of start, ignition
+ 9. Transmission
+ 10. Brake system
+ 11. Suspension brackets, a steering
+ 12. A body
+ 13. An electric equipment
+ 14. A good advice
|
Removal
| PERFORMANCE ORDER |
| 1. Remove a back cover of the engine. |
| 2. Unscrew candles. |
| 3. Establish piston N1 in ВМТ. |
|
ABP, AAT, AEL
| PERFORMANCE ORDER |
|
1. Loosen the a nut натяжителя. |
|
2. Remove a belt. |
|
AAS
| PERFORMANCE ORDER |
| Stop a pump asterisk, unscrew a bolt of an asterisk and remove a belt. |
|
Check
Examine a belt on presence of pollution by greasing or oil, and also on presence of deterioration or damages. If necessary replace a belt. Installation
Installation is made in sequence, return to removal. ABP, AAT, AEL
| PERFORMANCE ORDER |
|
Put to the lever натяжителя effort approximately in 2,5 kg, turn a cranked shaft on a turn floor clockwise and tighten a nut натяжителя. |
|
AAS
Belt will pull correctly if it can be overwound no more than on 90 . |
|
