Audi 100/A6

1990-1997 of release

Repair and car operation

Audi 100/A6
+ 1. The maintenance instruction
+ 2. Maintenance service
- 3. Engines
   - 3.1.1.2. Technical characteristics
      3.1.1.3. Sinhronizatsionnye labels timing
      3.1.1.4. Compression check
      3.1.1.5. A gazoraspredelitelnyj belt
      3.1.1.6. Натяжитель газораспределительного a belt, an asterisk
      3.1.1.7. Additional приводные belts
      3.1.1.8. A camshaft cover
      3.1.1.9. A camshaft epiploon
      3.1.1.10. An epiploon of an intermediate shaft
      3.1.1.11. Epiploons of a cranked shaft
      3.1.1.12. A head of cylinders
      3.1.1.13. Hydraulic pushers
      3.1.1.14. A flywheel
      3.1.1.15. Engine fastenings
      3.1.1.16. The oil pallet
      3.1.1.17. The oil pump and маслозаборный a branch pipe
   + 3.1.2. 5-cylinder engines
   + 3.1.3. 6-cylinder engines
+ 3.2. Diesel engines
+ 3.3. Removal and a partition of engines
+ 4. Cooling system
+ 5. Heating and ventilation
+ 6. Fuel system
+ 7. An exhaust system
+ 8. Systems of start, ignition
+ 9. Transmission
+ 10. Brake system
+ 11. Suspension brackets, a steering
+ 12. A body
+ 13. An electric equipment
+ 14. A good advice

3.1.1.6. Натяжитель газораспределительного a belt, an asterisk Removal

PERFORMANCE ORDER

1. Remove газораспределительный a belt.

НАТЯЖИТЕЛЬ

PERFORMANCE ORDER

2. Turn a pulley натяжителя counter-clockwise and insert the probe into an aperture located in its top part. Unscrew a bolt from a nave. Unscrew fixing bolts натяжителя.

3. In engines AAE, ABK, AAD unscrew a bolt and disconnect натяжитель from a forward part of the engine, braid a nut and disconnect a pulley натяжителя.

4. In engines to ASYA unscrew a nut and disconnect a nave in a forward part of the engine.

CAMSHAFT ASTERISK

PERFORMANCE ORDER

5. Stop an asterisk and unscrew a bolt.

6. Get a bolt.

7. Get segment шпонку.

ASTERISK OF THE INTERMEDIATE SHAFT

PERFORMANCE ORDER

8. Unscrew a bolt of an asterisk and remove it.

ASTERISK OF THE CRANKED SHAFT

PERFORMANCE ORDER

9. Unscrew an asterisk bolt, preliminary having stopped a shaft, and remove an asterisk.

Check

PERFORMANCE ORDER

1. Clean asterisks and check up them on presence of deterioration and damages.

2. Check up натяжитель on presence of deterioration and damages.

Installation

ASTERISK OF THE CRANKED SHAFT

PERFORMANCE ORDER

1. Put on an asterisk a shaft and tighten a bolt.

2. Establish газораспределительный a belt.

ASTERISK OF THE INTERMEDIATE SHAFT

PERFORMANCE ORDER

3. Insert шпонку into a shaft, put on an asterisk and tighten a bolt.

4. Put on an asterisk a belt.

CAMSHAFT ASTERISK

PERFORMANCE ORDER

5. Insert шпонку, put on an asterisk, a washer and tighten a bolt.

6. Put on an asterisk a belt.

НАТЯЖИТЕЛЬ

PERFORMANCE ORDER

7. Establish натяжитель.