Audi 100/A6

1990-1997 of release

Repair and car operation



Audi 100/A6
+ 1. The maintenance instruction
+ 2. Maintenance service
+ 3. Engines
+ 3.2. Diesel engines
+ 3.3. Removal and a partition of engines
+ 4. Cooling system
+ 5. Heating and ventilation
+ 6. Fuel system
+ 7. An exhaust system
+ 8. Systems of start, ignition
+ 9. Transmission
+ 10. Brake system
+ 11. Suspension brackets, a steering
- 12. A body
   12.2. Maintenance service and repair
   12.3. A forward bumper
   12.4. A back bumper
   12.5. A cowl
   + 12.6. A rope of opening of a cowl
   12.7. The cowl lock
   12.8. Doors
   12.9. The internal panel of furnish of a door
   12.10. A frame of a window of a door
   12.11. The handle of a door and lock elements
   12.12. Glass and window lifter
   12.13. A luggage carrier cover
   12.14. Elements of the lock of a cover of a luggage carrier
   12.15. A back door
   12.16. Elements of the lock of a back door
   12.17. Elements of the central lock
   + 12.18. Elements electric Glass lifts
   12.19. Rear-view mirrors and the elements connected with them
   12.20. Front and back glass
   12.21. The top hatch
   12.22. External elements of furnish of a body
   12.23. Sitting
   12.24. The mechanism of a tension of forward seat belts
   12.25. Elements of seat belts
   12.26. Panels of furnish of salon
   12.27. The central console
   12.28. The panel of devices
+ 13. An electric equipment
+ 14. A good advice


9df16362 От каких недугов вас избавят домашние животные

12.28. The panel of devices
THE GENERAL DATA

Models with моделум a safety air cushion
1. A body

2. The panel of devices

3. A fixing nut

4. A fixing arm

5. A latch

Removal

PERFORMANCE ORDER
1. Remove the central console.
2. Remove a steering wheel.
3. Remove the instrument guard, the combined switch and a shelf.
4. Turn off fixing screws (are specified by arrows) and remove the central panel.
5. Remove the panel of furnish of the lock of ignition.
6. Turn off fixing screws of the central fastening.
7. Remove lateral panels of furnish.
8. Turn off two fixing bolts (are specified by arrows and remove the block of safety locks.
9. Disconnect a socket of connection of a bulb of illumination of a glove compartment and disconnect a socket of connection of the relay.
10. On models with the module of an air cushion of safety will twist an additional fixing nut.
11. Turn off the remained fixing bolts and remove the panel of devices.

Installation

Installation is spent upside-down removals.