|
Removal
| PERFORMANCE ORDER |
|
1. Remove the top panel of furnish (arrows fixing clips are shown). |
|
2. Remove lateral panels of furnish. |
|
3. Turn off fixing screws on each side and from above the main panel of furnish. |
|
4. Turn off the fixing screws located in deepening of the handle. |
|
5. Remove the furnish panel. |
|
6. Get plugs of wires / of hoses. |
|
7. Disconnect wires and remove them from a door. |
|
8. Disconnect a vacuum hose and remove it from a door. |
|
MODELS ON WHICH LOOPS FASTEN TO THE BACK DOOR BY MEANS OF BOLTS
| PERFORMANCE ORDER |
| 9. Mark position of loops on a back door. |
| 10. Disconnect basic racks. |
|
|
11. Turn off fixing bolts and remove a back door. |
|
MODELS ON WHICH LOOPS FASTEN TO THE BACK DOOR BY MEANS OF NUTS
Elements of fastening of loops
|
1. Washers
2. A fixing plate
|
3. Fixing nuts
4. A cap |
| PERFORMANCE ORDER |
| 9. Remove a back spoiler. |
| 10. Remove protective caps. Mark position of loops on a back door. |
| 11. Disconnect basic racks. |
| 12. Turn off fixing nuts and remove a back door. |
|
Installation
Installation is spent upside-down removals.
|
