Audi 100/A6

1990-1997 of release

Repair and car operation


Audi 100/A6
+ 1. The maintenance instruction
+ 2. Maintenance service
+ 3. Engines
+ 3.2. Diesel engines
+ 3.3. Removal and a partition of engines
+ 4. Cooling system
+ 5. Heating and ventilation
+ 6. Fuel system
+ 7. An exhaust system
+ 8. Systems of start, ignition
+ 9. Transmission
+ 10. Brake system
+ 11. Suspension brackets, a steering
- 12. A body
   12.2. Maintenance service and repair
   12.3. A forward bumper
   12.4. A back bumper
   12.5. A cowl
   + 12.6. A rope of opening of a cowl
   12.7. The cowl lock
   12.8. Doors
   12.9. The internal panel of furnish of a door
   12.10. A frame of a window of a door
   12.11. The handle of a door and lock elements
   12.12. Glass and window lifter
   12.13. A luggage carrier cover
   12.14. Elements of the lock of a cover of a luggage carrier
   12.15. A back door
   12.16. Elements of the lock of a back door
   12.17. Elements of the central lock
   + 12.18. Elements electric Glass lifts
   12.19. Rear-view mirrors and the elements connected with them
   12.20. Front and back glass
   12.21. The top hatch
   12.22. External elements of furnish of a body
   12.23. Sitting
   12.24. The mechanism of a tension of forward seat belts
   12.25. Elements of seat belts
   12.26. Panels of furnish of salon
   12.27. The central console
   12.28. The panel of devices
+ 13. An electric equipment
+ 14. A good advice


9df16362

12.16. Elements of the lock of a back door

Removal

PERFORMANCE ORDER
1. Remove the top panel of furnish (arrows fixing clips are shown).
2. Remove lateral panels of furnish.
3. Turn off fixing screws on each side and from above the main panel of furnish.
4. Turn off the fixing screws located in deepening of the handle.
5. Remove the furnish panel.

THE LOCK

PERFORMANCE ORDER
1. Disconnect draughts and a socket of connection from the lock.
2. Turn off fixing nuts (arrow) and remove the lock.

CASING OF THE DRUM OF THE LOCK

PERFORMANCE ORDER
1. Disconnect draughts from a lock drum. Disconnect a connection socket.
2. Turn off fixing nuts (arrow) and remove a lock drum.

THE DOOR HANDLE

PERFORMANCE ORDER
1. Remove the screen wiper engine.
2. Release fixing clips and disconnect draughts from the handle.
3. Turn off fixing bolts (arrows) and remove the handle.

Installation

 Installation is spent upside-down removals.
At installation use regulators (are specified by arrows) for adjustment of length of draughts.