Suzuki Grand Vitara SQ416/SQ420/420WD

since 1998 release

Repair and operation of the car


Suzuki Grand Vitara
+ General information
+ Maintenance and lubricant
+ Heater, ventilation and conditioner
+ Steering
+ Suspension bracket
+ Wheels and tires
+ Forward driving shaft / bearing of a shaft. Oil epiploon
+ Driveshafts
+ Brake system
+ Engines
+ Fuel system
+ System of ignition
+ System of start
+ System of release
+ Transmissions
+ Coupling
+ Transfer
+ Forward and back differentials
+ Windows, mirrors, locks and security measures. Immobilizer
- Electric equipment
   + Body electric equipment
   - System of lighting
      + Cars with tarpaulin top
      + Diagnostics
      - Maintenance
         - Headlights
            The switch of passing/driving beam (in the combined switch)
            Replacement of lamps
            Adjustment of a corner of headlights
         + Headlights with system of autocorrection (if it is provided)
         + Indexes of turn and system of the alarm system
         + A back fog light (if it is provided)
   + System of electric equipment
   + Tools/information for drivers

9df16362

Maintenance

Headlights

The switch of passing/driving beam (in the combined switch)

Check

 PERFORMANCE ORDER

    Disconnect "weight" from the rechargeable battery. Disconnect a wire from the combined switch.
    Check for continuity of connection between all plugs in all provisions of the switch. If results of check not such as it is specified, replace the switch

Switch of light of headlights

Switch of passing/driving beam

Removal/installation

For the cars which are not equipped with the "air bag" system see the Section Understeering switches in the Head the Steering wheel and a steering column. For the cars equipped with the "air bag" system see the Section the Contact coil and understeering switches in the Head the Steering wheel and a steering column (with a safety cushion).

Removal

 PERFORMANCE ORDER

    Disconnect "weight" from the rechargeable battery. Remove a forward lattice. Disconnect wires and sockets from the headlight block.
    Turn off three bolts and get a headlight.

Installation

 PERFORMANCE ORDER

    Installation is carried out in the sequence of the return to removal of a headlight. After installation surely adjust headlights, referring to the Section Adjustment of a Corner of Headlights.