Suzuki Grand Vitara
+ General information
+ Maintenance and lubricant
+ Heater, ventilation and conditioner
+ Steering
+ Suspension bracket
+ Wheels and tires
+ Forward driving shaft / bearing of a shaft. Oil epiploon
+ Driveshafts
+ Brake system
+ Engines
+ Fuel system
+ System of ignition
+ System of start
+ System of release
- Transmissions
- Mechanical transmission (type 1)
Description of system
Diagnostics
- Service out of a workshop
Oil for the transmission
Gear shifting lever
Illumination switch
Back fixture of the engine
Removal of the transmission
Installation of the transmission
The case extender (for model with the drive on two wheels and the G16 and J20 engine)
Oil epiploon of the case extender (for model with the drive on two wheels and the G16 and J20 engine)
+ Mechanical transmission (type 2)
+ Automatic transmission (4 A/T)
+ Coupling
+ Transfer
+ Forward and back differentials
+ Windows, mirrors, locks and security measures. Immobilizer
+ Electric equipment
|
Illumination switch
|
|
Refrain from work, the central exhaust pipe hot so far. |
Removal and installation
|
|
When replacing the switch be careful that dust did not get to the transmission through a switch opening. |
|
|
Lift the car.
Remove a hitch (i) of wires of the switch.
Type 1 and type 2
|
|
1 — an illumination switch hitch
2 — the forward driveshaft |
Type 3
|
|
1 — an illumination switch hitch
2 — the forward driveshaft |
Replace the switch of illumination (1), connect and fix as was in a starting position.
Inhaling moment:
(a): 20 N • m (2.0 kg-m, 14.5 pounds feet) (Type 1)
(a): 45 N • m (4.5 kg-m, 32.5 pounds feet) (Type 2 and type 3)
After replacement of the switch of illumination check serviceability of operation of the switch, having turned the ignition key in situation "INCL." (ON), and having switched transfer to the provision of a backing. After check of operation of the switch, switch off it.
Type 1
|
|
2 — the central exhaust pipe |
|
|
Check
|
|
Open a latch and disconnect an illumination switch hitch.
|
|
Operation of the switch of illumination (1) can be checked.
|
The chain has to become isolated on its terminals only when the lever of switching is in the provision of a backing.
Upon completion of check attach a hitch and wires of a clip as they were connected initially.
|
|
When replacing the switch be careful that dust did not get to the transmission through a switch opening. |
|
|
|
|
