Audi 100/A6

1990-1997 of release

Repair and car operation

Audi 100/A6
+ 1. The maintenance instruction
+ 2. Maintenance service
+ 3. Engines
- 3.2. Diesel engines
   - Technical characteristics Sinhronizatsionnye labels timing Compression check A gazoraspredelitelnyj belt Натяжитель газораспределительного a belt, an asterisk Additional приводные belts A camshaft cover A camshaft epiploon An epiploon of an intermediate shaft Epiploons of a cranked shaft A head of cylinders Hydraulic pushers A flywheel Engine fastenings The oil pallet The oil pump and маслозаборный a branch pipe
   + 3.2.2. 5-cylinder engines
+ 3.3. Removal and a partition of engines
+ 4. Cooling system
+ 5. Heating and ventilation
+ 6. Fuel system
+ 7. An exhaust system
+ 8. Systems of start, ignition
+ 9. Transmission
+ 10. Brake system
+ 11. Suspension brackets, a steering
+ 12. A body
+ 13. An electric equipment
+ 14. A good advice

9df16362 dm clinic на заневском
9df16362 dm clinic на заневском Additional приводные belts


1. Lift and fix a forward part of the car.
2. Loosen the lock and fixing bolts of the pump of the hydraulic booster of a wheel.
3. Loosen the a rotary bolt of the pump also turn an adjusting nut counter-clockwise to weaken a belt tension.
4. Remove a belt.

Installation and adjustment

Installation is spent upside-down removals.

1. Pull a belt, having shifted the pump to the left.
2. Adjust a belt tension, having twisted an adjusting nut clockwise. By pressing by a finger, the new belt should cave in on 5,0 mm, the used 2,0 mm.
3. Tighten a lock bolt of the pump, holding an adjusting nut with a key.


1. Lift and fix a forward part of the car.
2. Remove клинообразный a belt.
3. Uncover a pulley натяжителя.
4. Turn a pulley bolt натяжителя clockwise and remove a belt.

Installation and adjustment

1. Put on a belt.
2. Turn a pulley натяжителя counter-clockwise to pull a belt.