Audi 100/A6

1990-1997 of release

Repair and car operation



Audi 100/A6
+ 1. The maintenance instruction
+ 2. Maintenance service
+ 3. Engines
+ 3.2. Diesel engines
+ 3.3. Removal and a partition of engines
+ 4. Cooling system
+ 5. Heating and ventilation
+ 6. Fuel system
+ 7. An exhaust system
+ 8. Systems of start, ignition
+ 9. Transmission
+ 10. Brake system
+ 11. Suspension brackets, a steering
- 12. A body
   12.2. Maintenance service and repair
   12.3. A forward bumper
   12.4. A back bumper
   12.5. A cowl
   + 12.6. A rope of opening of a cowl
   12.7. The cowl lock
   12.8. Doors
   12.9. The internal panel of furnish of a door
   12.10. A frame of a window of a door
   12.11. The handle of a door and lock elements
   12.12. Glass and window lifter
   12.13. A luggage carrier cover
   12.14. Elements of the lock of a cover of a luggage carrier
   12.15. A back door
   12.16. Elements of the lock of a back door
   12.17. Elements of the central lock
   + 12.18. Elements electric Glass lifts
   12.19. Rear-view mirrors and the elements connected with them
   12.20. Front and back glass
   12.21. The top hatch
   12.22. External elements of furnish of a body
   12.23. Sitting
   12.24. The mechanism of a tension of forward seat belts
   12.25. Elements of seat belts
   12.26. Panels of furnish of salon
   12.27. The central console
   12.28. The panel of devices
+ 13. An electric equipment
+ 14. A good advice


9df16362

12.11. The handle of a door and lock elements

Removal

THE INTERNAL HANDLE OF OPENING OF THE DOOR

Look subsection 12.9.

ВНЕШННЯЯ THE HANDLE OF THE FORWARD DOOR

PERFORMANCE ORDER
1. Remove a frame of glass and a protective casing if it is necessary.
2. Lift the handle, remove a fixing clip and a casing.
3. Release the plug of the lock (marksman) and disconnect draught of the handle from the lock.
4. Turn a fixing clip and remove it from the lock and a door.

5. Turn off the fixing screw and remove the external handle from a door.

DRUM OF THE LOCK OF THE FORWARD DOOR

PERFORMANCE ORDER
1. Remove the external handle.
2. Shift the plug downwards and disconnect draught from the lock.
3. Disconnect a socket of connection from the switch.
4. Remove the panel of furnish of the handle and remove a lock casing.
5. Remove the switch if it is necessary.

THE LOCK OF THE FORWARD DOOR

PERFORMANCE ORDER
1. Remove a door frame.
2. Disconnect draughts from the lock.
3. Disconnect a socket of connection of a drive of the lock.
4. On models with the central lock disconnect a vacuum hose from a lock drive.

5. Turn off fixing screws.

6. Remove the lock and consolidation.
7. Turn a rope on 90 and disconnect it from the lock.

THE EXTERNAL HANDLE OF THE BACK DOOR

PERFORMANCE ORDER
1. Remove a door frame.
2. Release a fixing clip and disconnect draught of the lock from the handle.

3. Turn off fixing screws and remove the handle.

THE LOCK OF THE BACK DOOR

PERFORMANCE ORDER
1. Remove a door frame.
2. Disconnect draught of the lock from the handle.
3. Remove ropes of the lock from fastenings on a door.
4. Turn off fixing screws and disconnect a vacuum hose.
5. Cнимите the lock.
6. Disconnect ropes after lock removal.

Installation

PERFORMANCE ORDER
Installation is spent upside-down removals. Adjust length of draught so that there was a free wheeling approximately in 1 mm, then establish a fixing clip.