Audi 100/A6
1990-1997 of release
Repair and car operation
Audi 100/A6
+
1. The maintenance instruction
+
2. Maintenance service
+
3. Engines
+
3.2. Diesel engines
+
3.3. Removal and a partition of engines
+
4. Cooling system
+
5. Heating and ventilation
-
6. Fuel system
+
6.1.2. Technical characteristics
+
6.2. Multidot system of injection of fuel
+
6.3. System of injection MPI/MPFI (6-cylinder engines)
-
6.4. The power supply system of diesel engines
6.4.2. Technical characteristics
6.4.3. The air filter
6.4.4. A rope of an accelerator and elements of a pedal of an accelerator
6.4.5. The gauge of level of fuel
6.4.6. A fuel tank
+
6.4.7. The injecting pump
6.4.8. Speed of idling and the maximum speed of work of engine AAS
6.4.9. A mode of fast idling (engine AAS)
6.4.10. Residual volume of fuel (engine AAS)
6.4.11. Fuel injectors
6.4.12. A control system of work of the diesel engine
6.4.13. An inlet collector
6.5. The device of service of heating
6.6. Diagnostics of malfunctions of system of heating
6.7. The conditioner: not only "pluses", but also "minuses"
6.8. Rules of service of the conditioner
+
7. An exhaust system
+
8. Systems of start, ignition
+
9. Transmission
+
10. Brake system
+
11. Suspension brackets, a steering
+
12. A body
+
13. An electric equipment
+
14. A good advice
https://glamorlady.ru:
необитаемый остров
6.4.8. Speed of idling and the maximum speed of work of engine AAS
Check and adjustment
SPEED OF IDLING
PERFORMANCE ORDER
1.
Warm up the engine to normal working temperature.
2.
For adjustment of speed of idling tighten up the adjusting screw.
THE MAXIMUM SPEED OF WORK OF THE ENGINE
PERFORMANCE ORDER
1.
Completely squeeze out a pedal of an accelerator and define frequency of rotation of a cranked shaft by means of a tachometre.
2.
Turn off a counternut and adjust the maximum speed if it is necessary, rotating the adjusting screw.
https://glamorlady.ru: