| 1. Remove the case throttle заслонки and an intermediate flange. |
|
|
| 2. Disconnect water and vacuum hoses from an inlet collector |
|
|
| 3. Turn off bolts and a nut and remove a fixing arm of a heating element of an inlet collector. |
|
|
| 4. Remove a washer and disconnect a socket of connection of a heating element. |
|
5. Turn off fixing bolts and remove them.
|
|
6. Remove inlet колектор.
|
|
|
| 7. Remove a lining and a sealing ring. |
|
8. Turn off fixing bolts and remove a heating element if it is necessary.
|
