Suzuki Grand Vitara SQ416/SQ420/420WD

since 1998 release

Repair and operation of the car



Suzuki Grand Vitara
+ General information
+ Maintenance and lubricant
+ Heater, ventilation and conditioner
- Steering
   - Suspension bracket, wheels and tires
      + General diagnostics
      - Diagnostics of tires
         The uneven and/or increased wear
         Wear indicator
         Instability
         Leaving from the rectilinear movement, or maintaining
      Diagnostics of vibrations
   + Adjustment of angles of installation of wheels of a forward suspension bracket
   + System of the power steering
   + Steering wheel and steering column
+ Suspension bracket
+ Wheels and tires
+ Forward driving shaft / bearing of a shaft. Oil epiploon
+ Driveshafts
+ Brake system
+ Engines
+ Fuel system
+ System of ignition
+ System of start
+ System of release
+ Transmissions
+ Coupling
+ Transfer
+ Forward and back differentials
+ Windows, mirrors, locks and security measures. Immobilizer
+ Electric equipment


9df16362

Diagnostics of tires

The uneven and/or increased wear

The uneven or increased wear of a protector can be caused by many reasons. Such, as: the wrong pressure in tires, the recommended shift of tires, a driving manner, the wrong angles of installation of wheels was not carried out.

If the following states were noted, then it is necessary to execute the recommended shift of wheels.

    Wear of forward tires differs from wear of back. Uneven wear of the drawing of a protector on one tire. Wear of a protector of a forward left and forward right wheel unequal. Wear of a protector of a back left and back right wheel unequal. Chasheobraznost, dents on the tire, etc.

If the following states were noted, then it is necessary to execute check a catch of installation of wheels.

    The left and right tires of a forward axis are not identical are worn-out. Uneven wear of the drawing of a protector on one tire. The protector of forward tires is worn-out on the one hand.
Passing of abrupt turns on speeds, excessive pressure in tires, the recommended shift of tires was not carried out.
The wrong angles of installation of wheels, non-uniform design of the tire, driving with pro-slippings.