1. Warm up the engine. |
|
2. Turn off заглушку a drain aperture approximately on a turn floor. Establish the container for gathering of oil and completely unscrew заглушку. |
3. Wait, while oil will flow down, moving the container if it is necessary. |
4. Wipe заглушку and replace a sealing washer if it is necessary. Wipe area round a drain aperture and twirl заглушку till the demanded moment of an inhaling. |
5. Establish the container for oil gathering under the oil filter. |
|
6. Using the tool for removal of the oil filter if it is necessary, ослабьте a filter inhaling. |
|
7. Unscrew the filter a hand |
8. Clear a filter installation site. Oil a sealing ring of the new filter and establish it on the engine. Reliably twirl the filter a hand. |
|
9. Turn off a cap of a jellied mouth. |
|
10. Get probe for check of level of oil. |
|
11. Fill in oil of demanded type. |
12. Start the engine and check up, whether there is leak of oil round the oil filter and заглушки no drain aperture. |
The prevention On models with турбокомпрессором do not lift engine turns, the alarm bulb of pressure of oil will not go out yet!
|