Suzuki Grand Vitara SQ416/SQ420/420WD

since 1998 release

Repair and operation of the car

Suzuki Grand Vitara
+ General information
+ Maintenance and lubricant
+ Heater, ventilation and conditioner
+ Steering
+ Suspension bracket
+ Wheels and tires
+ Forward driving shaft / bearing of a shaft. Oil epiploon
+ Driveshafts
+ Brake system
+ Engines
+ Fuel system
- System of ignition
   - System of ignition for the G16 engine
      + General description
      + Diagnostics
      - Service of the vehicle
         Check of a spark of ignition
         Check of time of an advancing of ignition
         Wire of high voltage
         Assembly of the coil of ignition (igniter and coil of ignition)
         Spark plug
         The resistor an ignition advancing (if it is established)
         CMP sensor
         Noise suppressor
      Specification, torque of an inhaling
      Special tool
   + System of ignition for the J20 engine
+ System of start
+ System of release
+ Transmissions
+ Coupling
+ Transfer
+ Forward and back differentials
+ Windows, mirrors, locks and security measures. Immobilizer
+ Electric equipment

Wire of high voltage

Removal

PERFORMANCE ORDER

Remove a wire of high voltage (2) from the coil of ignition (1), holding its cap.

Extend a wire of high voltage (2) from a spark plug, holding its cap.

Removal of wires of high voltage together with clips can damage wires inside (a wire of high resistance).
For the same reason, disconnect wires, holding for a cap.

Survey

PERFORMANCE ORDER

to/m (1.2 - 3.0 to/foot).

Check whether is not present for damages, permission and corrosion of conclusions. If result of check unsatisfactory, replace a wire(s) of high voltage.

Installation

Establish a wire of high voltage (2) on a spark plug and the coil of ignition (1), holding its cap.

Never use the metal conductor of high voltage for replacement.
Completely insert caps when you establish wires of high voltage.