Audi 100/A6

1990-1997 of release

Repair and car operation



Audi 100/A6
+ 1. The maintenance instruction
+ 2. Maintenance service
+ 3. Engines
+ 3.2. Diesel engines
+ 3.3. Removal and a partition of engines
+ 4. Cooling system
+ 5. Heating and ventilation
+ 6. Fuel system
+ 7. An exhaust system
+ 8. Systems of start, ignition
- 9. Transmission
   + 9.1.2. Technical characteristics
   - 9.2. A Mehnichesky transmission
      + 9.2.2. Technical characteristics
      9.2.3. The gear change mechanism
      9.2.4. Removal and installation manual transmission
      9.2.5. Partition manual transmission
      9.2.6. The multipurpose switch and the switch of lanterns of a backing
      9.2.7. The speedometer gauge
      9.2.8. Epiploons
      9.2.9. Evident repair of a transmission 012
   + 9.3. An automatic transmission
+ 10. Brake system
+ 11. Suspension brackets, a steering
+ 12. A body
+ 13. An electric equipment
+ 14. A good advice


9df16362 Brilliance BS4 Wagon - про автомобиль Brilliance BS4 Wagon

9.2.3. The gear change mechanism Adjustment

TRANSMISSION 012

PERFORMANCE ORDER
1. Lift and fix a forward part of the car.
2. Establish the gear change lever in neutral position. Remove the lever handle, a framework and a cover.
3. Remove a cross-beam from under a transmission.
4. Lower a forward part of the thermal screen. Remove forward section of an exhaust pipe and каталитический the converter.
5. Loosen the an adjusting bolt on the switching mechanism.
6. Establish the gear change lever in vertical position. Centre by means of a ruler (012).
7. From both parties there should be an identical distance ().
8. Check up, that the switching rod was in neutral position, and tighten an adjusting bolt.
9. Check up work of the lever of a gear change.
10. Establish the remained details and lower the car.

TRANSMISSION 01Е

Adjustment of a connecting rod (01Е)

b = 168,5 mm

PERFORMANCE ORDER
1. Include 2nd transfer and shift the gear change lever to the left against the stop. Release the lever, it should be displaced on 3–9 mm in neutral position. Check up work of the lever of a gear change.
2. For carrying out of adjustment of the mechanism of a gear change address to experts.