Audi 100/A6

1990-1997 of release

Repair and car operation



Audi 100/A6
+ 1. The maintenance instruction
+ 2. Maintenance service
+ 3. Engines
+ 3.2. Diesel engines
+ 3.3. Removal and a partition of engines
+ 4. Cooling system
+ 5. Heating and ventilation
+ 6. Fuel system
+ 7. An exhaust system
+ 8. Systems of start, ignition
- 9. Transmission
   - 9.1.2. Technical characteristics
      9.1.3. Prorolling of hydraulic system of a drive of deenergizing of coupling
      9.1.4. Coupling adjustment
      9.1.5. A coupling pedal
      9.1.6. The main cylinder of a drive of deenergizing of coupling
      9.1.7. The working cylinder of a drive of deenergizing of coupling
      9.1.8. A disk of coupling and a casing
      9.1.9. The vyzhimnoj bearing and the lever
      9.1.10. Malfunctions of coupling
   + 9.2. A Mehnichesky transmission
   + 9.3. An automatic transmission
+ 10. Brake system
+ 11. Suspension brackets, a steering
+ 12. A body
+ 13. An electric equipment
+ 14. A good advice


9df16362

9.1.8. A disk of coupling and a casing Removal

PERFORMANCE ORDER
1. Remove a transmission for access reception to coupling.

2. Mark position of installation of a casing of coupling on a flywheel.
3. Keeping a flywheel, turn off fixing bolts of a casing of coupling in a diagonal order. Remove bolts.
4. Remove a casing of coupling and a frictional disk from a flywheel.

Survey

Examine plates диафрагменной springs on presence of deterioration and scratches. If depth any scratches exceeds 0,3 mm, replace coupling.

Examine press and a frictional disk, and also a flywheel on presence of deterioration or damages and replace them if it is necessary.

Installation

PERFORMANCE ORDER
1. Establish a frictional disk on a flywheel.
2. Establish a coupling casing on a disk.
3. Acquire fixing bolts and establish a frictional disk precisely on the centre of a casing of coupling and a flywheel.
4. Gradually in a diagonal order tighten fixing bolts of a casing of coupling till the demanded moment of an inhaling.