Audi 100/A6

1990-1997 of release

Repair and car operation



Audi 100/A6
+ 1. The maintenance instruction
+ 2. Maintenance service
- 3. Engines
   - 3.1.1.2. Technical characteristics
      3.1.1.3. Sinhronizatsionnye labels timing
      3.1.1.4. Compression check
      3.1.1.5. A gazoraspredelitelnyj belt
      3.1.1.6. Натяжитель газораспределительного a belt, an asterisk
      3.1.1.7. Additional приводные belts
      3.1.1.8. A camshaft cover
      3.1.1.9. A camshaft epiploon
      3.1.1.10. An epiploon of an intermediate shaft
      3.1.1.11. Epiploons of a cranked shaft
      3.1.1.12. A head of cylinders
      3.1.1.13. Hydraulic pushers
      3.1.1.14. A flywheel
      3.1.1.15. Engine fastenings
      3.1.1.16. The oil pallet
      3.1.1.17. The oil pump and маслозаборный a branch pipe
   + 3.1.2. 5-cylinder engines
   + 3.1.3. 6-cylinder engines
+ 3.2. Diesel engines
+ 3.3. Removal and a partition of engines
+ 4. Cooling system
+ 5. Heating and ventilation
+ 6. Fuel system
+ 7. An exhaust system
+ 8. Systems of start, ignition
+ 9. Transmission
+ 10. Brake system
+ 11. Suspension brackets, a steering
+ 12. A body
+ 13. An electric equipment
+ 14. A good advice


9df16362

3.1.1.11. Epiploons of a cranked shaft Replacement

FORWARD EPIPLOON OF THE CRANKED SHAFT

PERFORMANCE ORDER
1. Remove газораспределительный a belt and an asterisk of a cranked shaft.
2. Drill two apertures in an epiploon, twist in them screws.
3. Take an epiploon, or remove a casing of an epiploon and beat out an epiploon from a casing.
4. Hammer a new epiploon.
5. Establish an epiploon casing into place.

BACK EPIPLOON OF THE CRANKED SHAFT

PERFORMANCE ORDER
1. Remove a flywheel.
2. Drill two apertures in an epiploon, twist in them screws.
3. Take an epiploon, or remove a casing of an epiploon and beat out an epiploon from a casing.

4. Hammer a new epiploon and establish an epiploon casing into place.