Suzuki Grand Vitara SQ416/SQ420/420WD

since 1998 release

Repair and operation of the car


Suzuki Grand Vitara
+ General information
+ Maintenance and lubricant
+ Heater, ventilation and conditioner
- Steering
   + Suspension bracket, wheels and tires
   - Adjustment of angles of installation of wheels of a forward suspension bracket
      - General information
         Convergence of forward wheels
         Disorder of forward wheels
         Custer
         Preparation for adjustment of angles of installation of wheels of a forward suspension bracket
         Adjustment of a corner of a convergence of forward wheels
         Adjustment of a corner of disorder and Custer
         Angle of rotation of wheels
         Side sliding of wheels (standard)
   + System of the power steering
   + Steering wheel and steering column
+ Suspension bracket
+ Wheels and tires
+ Forward driving shaft / bearing of a shaft. Oil epiploon
+ Driveshafts
+ Brake system
+ Engines
+ Fuel system
+ System of ignition
+ System of start
+ System of release
+ Transmissions
+ Coupling
+ Transfer
+ Forward and back differentials
+ Windows, mirrors, locks and security measures. Immobilizer
+ Electric equipment

9df16362

Preparation for adjustment of angles of installation of wheels of a forward suspension bracket

Complaints to controllability and vibrations are not always caused by the wrong installation of corners of wheels. It is also necessary to check tires for wear and for their compliance with recommended by manufacturer. "Maintaining" is a spontaneous withdrawal of the car from the rectilinear movement in any party without pressure from a wheel. The head Steering, a suspension bracket, wheels and tires of this Management includes the procedure of identification of this problem.

Before adjustment of a convergence, the following checks have to be executed to exclude influence of other factors on correctness of reference values and on adjustment:

 PERFORMANCE ORDER

    Check that in all tires there was identical pressure and approximately identical wear of the drawing of a protector. Check spherical connections for side plays. Check tips of steering drafts. At detection of side plays, they have to be eliminated before adjustment. Check disks and tires for excessive wear. Check the car for a flash; if it does not keep within limits, then it needs to be eliminated before adjustment of a convergence. Check the rotary lever for side plays. Check the stabilizer of cross stability for rigidity of fastenings. If additional freight (for example, a box with tools) is in the car there constantly, then adjustment has to be carried out together with freight. To check a condition of the adjusting stand and to follow instructions of the producer. In independence of the used equipment, the car has to stand on a horizontal surface a forward and back part and has to be perpendicularly.

To prevent a possibility of incorrect reading of initial corners of disorder or Custer, a lobby (or back) a part of the car needs to be lifted and lowered several times before inspection.