Suzuki Grand Vitara SQ416/SQ420/420WD

since 1998 release

Repair and operation of the car



Suzuki Grand Vitara
- General information
   + Precautionary measures
   Main precautionary measures
   Precautionary measures during the work with the catalyst
   Precautionary measures at service of electric chains
   + Procedure of check of electric chains
   The interrupted or weak connection
   Precautionary measures at installation of means of mobile communication
   + Identification information
   The warning, warning and information stickers
   Places of raising of the car
   The list of the reductions which are used in this manual
   + Metric information
   Standard moments of inhalings
+ Maintenance and lubricant
+ Heater, ventilation and conditioner
+ Steering
+ Suspension bracket
+ Wheels and tires
+ Forward driving shaft / bearing of a shaft. Oil epiploon
+ Driveshafts
+ Brake system
+ Engines
+ Fuel system
+ System of ignition
+ System of start
+ System of release
+ Transmissions
+ Coupling
+ Transfer
+ Forward and back differentials
+ Windows, mirrors, locks and security measures. Immobilizer
+ Electric equipment


9df16362

Main precautionary measures

The following preventions and cautions describe the main precautionary measures which need to be observed at service of the car.

These precautionary measures are applicable to the majority of the service operations described in this manual and, it is not obligatory that they will repeat in each operation where they have to be observed.

At a car raising surely follow the instructions described in subsection of the Place of raising of the car in the Head the General information. When it is necessary for carrying out service works that the engine worked, make sure that the emergency brake is active and the transmission is in neutral situation for cars with MKPP and in situation "P" for cars with the automatic transmission. You hold hands, hair, clothes, the tool, etc. far away from fans and belts at the working engine.

If it is necessary that the engine worked indoors, make sure that the extract for exhaust gases works.

Do not perform service works in places where flammable materials can have contact with hot final system. During the work with toxic and highly inflammable materials (such as gasoline and coolant), provide good ventilation of a workplace.

To avoid burns, you steer clear of hot metal details, such as a radiator, a final collector, an exhaust pipe, the muffler, etc.

The new and fulfilled engine oil can be dangerous. Children and pets can suffer if take a sip the new or fulfilled oil. You store the new and fulfilled oil and oil filters far away from children and pets. At long contact with the fulfilled oil skin cancer at laboratory animals was revealed. The short-term contact with the fulfilled oil can cause irritation of skin. To reduce the irritating influence from contact with the fulfilled oil put on a uniform with long sleeves and waterproof gloves (such, as for washing of ware) when replacing engine oil. At contact of engine oil with skin, carefully wash out water with soap. Wash all clothes and rags on which oil got, reuse or correctly utilize the fulfilled oil and filters.

Check that the cowl is completely closed and latched before a trip. If is not present, then it can unexpectedly open during driving, complicating the review that can lead to accident.

Before any service operation, cover wings of the car, a seat and all parts of the car which can be scratched or soiled in operating time. Also you have to show consideration for the clothes since, for example, buttons can damage polishing of the car.
During work after the electrician which do not demand use of the rechargeable battery disconnect the minus plug from joint stock bank.
At removal of joint stock bank, disconnect the minus plug in the beginning, and then plus. At connection of joint stock bank, connect the plus plug in the beginning, and then minus, after that dress a cover.
At removal of spare parts which will be reused put them one after another that then to establish them in the correct sequence on places.
When using epiploons, laying, consolidations, sealing rings, the blocking washers, forelocks, самоконтрящихся nuts and some other spare parts, it is necessary to replace them with new. Also before installation of new laying, consolidations, etc. carefully remove the material remains from docking surfaces.

Check that all used spare parts ideally pure.

When using lubricant or sealant, check that it the specified type.

"And" — sealant 99000-3 1150

Use special tools where it is necessary.

Special adaptation

And — 09917-98221
B — 09916-58210

At a detachment of vacuum hoses, paste a label with the description of the correct adjusting position, for correct subsequent assembly.
After service of fuel, oil, vacuum, exhaust, brake systems and the cooling system, check all contours of the related systems for leaks.

During the work with the cars equipped with injector fuel system never separate a contour between the fuel pump and an injector without preliminary dumping of pressure since fuel can scatter under pressure.