Audi 100/A6

1990-1997 of release

Repair and car operation



Audi 100/A6
+ 1. The maintenance instruction
+ 2. Maintenance service
+ 3. Engines
+ 3.2. Diesel engines
+ 3.3. Removal and a partition of engines
+ 4. Cooling system
+ 5. Heating and ventilation
+ 6. Fuel system
- 7. An exhaust system
   7.2. Technical characteristics
   7.3. System of gathering of steams of fuel
   + 7.4. Gathering system картерных gases
   + 7.5. System recycling exhaust gases
   7.6. A final collector
   7.7. урбокомпрессор
   7.8. An intermediate cooler
   7.9. System of release of the fulfilled gases
   7.10. The Katalitichesky converter
+ 8. Systems of start, ignition
+ 9. Transmission
+ 10. Brake system
+ 11. Suspension brackets, a steering
+ 12. A body
+ 13. An electric equipment
+ 14. A good advice


9df16362

7.9. System of release of the fulfilled gases
THE GENERAL DATA

The exhaust system consists of a reception pipe, каталитического the converter, an intermediate pipe and the muffler, an exhaust pipe and the muffler.

Removal

Each of exhaust system sections can be removed separately from the others.

RECEPTION PIPE (INCLUDING the KATALITICHESKY CONVERTER ON MODELS With the ENGINE 1Z and AHU)


Fastening of a reception pipe of an exhaust system

PERFORMANCE ORDER
1. Remove a protective guard from below the engine and a cross-beam behind a transmission.
2. Turn off fixing bolts and fastening elements.
3. Turn off fixing nuts and disconnect a pipe from a final collector.
4. Turn off fixing bolts and remove a reception pipe.

THE KATALITICHESKY CONVERTER (EXCEPT MODELS WITH THE ENGINE 1Z AND AHU)

PERFORMANCE ORDER
5. Disconnect a reception pipe from каталитического the converter.
6. Turn off fixing bolts and remove каталитический the converter.

INTERMEDIATE PIPE

PERFORMANCE ORDER
7. Turn off fixing bolts and disconnect a pipe from каталитического
The converter and the muffler.
8. Remove an intermediate pipe.

EXHAUST PIPE AND THE MUFFLER

PERFORMANCE ORDER
9. Turn off fixing bolts and an intermediate pipe.
10. Remove the muffler and a pipe from fastenings.

HEAT-SHIELDING SCREENS

PERFORMANCE ORDER
11. For removal of screens it is necessary to turn off fixing screws.

Installation

Installation is spent upside-down removals.