Audi 100/A6

1990-1997 of release

Repair and car operation



Audi 100/A6
+ 1. The maintenance instruction
+ 2. Maintenance service
+ 3. Engines
- 3.2. Diesel engines
   + 3.2.1.2. Technical characteristics
   - 3.2.2. 5-cylinder engines
      3.2.2.2. Technical characteristics
      3.2.2.3. Sinhronizatsionnye labels timing
      3.2.2.4. Compression check
      3.2.2.5. A gazoraspredelitelnyj belt
      3.2.2.6. A privodnoj belt of the fuel pump
      3.2.2.7. Натяжитель газораспределительного a belt and an asterisk
      3.2.2.8. Additional приводной a belt
      3.2.2.9. A camshaft cover
      3.2.2.10. Camshaft epiploons
      3.2.2.11. Epiploons of a cranked shaft
      3.2.2.12. A head of cylinders
      3.2.2.13. Hydraulic pushers
      3.2.2.14. A flywheel
      3.2.2.15. Engine fastenings
      3.2.2.16. The oil pallet
      3.2.2.17. The oil pump and маслозаборный a branch pipe
+ 3.3. Removal and a partition of engines
+ 4. Cooling system
+ 5. Heating and ventilation
+ 6. Fuel system
+ 7. An exhaust system
+ 8. Systems of start, ignition
+ 9. Transmission
+ 10. Brake system
+ 11. Suspension brackets, a steering
+ 12. A body
+ 13. An electric equipment
+ 14. A good advice


9df16362

3.2.2.7. Натяжитель газораспределительного a belt and an asterisk Removal

PERFORMANCE ORDER
1. Remove газораспределительный a belt.
2. Unscrew bolts and remove натяжитель.

Installation

PERFORMANCE ORDER
1. Establish натяжитель. In late models the plate натяжителя should put on on the probe.
2. Establish газораспределительный a belt and adjust its tension.

FORWARD ASTERISK OF THE CAMSHAFT

Removal

PERFORMANCE ORDER
1. Remove газораспределительный a belt.
2. Uncover a camshaft.
3. Shift an asterisk.
4. Get a bolt.
5. Remove an asterisk.

Installation

Installation is made in sequence, return to removal.

BACK ASTERISK OF THE CAMSHAFT

Removal

PERFORMANCE ORDER
1. Remove приводной a belt of the fuel pump.
2. Loosen the an asterisk bolt.
3. Unscrew a bolt.
4. Remove a back asterisk of a camshaft.

Installation

Installation is made in sequence, return to removal.

ASTERISK OF THE CRANKED SHAFT

PERFORMANCE ORDER
Remove газораспределительный a belt and an asterisk of a cranked shaft.

Installation

Installation is made in sequence, return to removal.