Audi 100/A6

1990-1997 of release

Repair and car operation



Audi 100/A6
+ 1. The maintenance instruction
+ 2. Maintenance service
- 3. Engines
   + 3.1.1.2. Technical characteristics
   - 3.1.2. 5-cylinder engines
      3.1.2.2. Technical characteristics
      3.1.2.3. Sinhronizatsionnye labels timing
      3.1.2.4. Compression check
      3.1.2.5. A gazoraspredelitelnyj belt
      3.1.2.6. Натяжитель газораспределительного a belt, an asterisk
      3.1.2.7. Additional приводной a belt
      3.1.2.8. A camshaft cover
      3.1.2.9. A camshaft epiploon
      3.1.2.10. Epiploons of a cranked shaft
      3.1.2.11. A head of cylinders
      3.1.2.12. Hydraulic pushers
      3.1.2.13. A flywheel
      3.1.2.14. Engine fastenings
      3.1.2.15. The oil pallet
      3.1.2.16. The oil pump and маслозаборный a branch pipe
   + 3.1.3. 6-cylinder engines
+ 3.2. Diesel engines
+ 3.3. Removal and a partition of engines
+ 4. Cooling system
+ 5. Heating and ventilation
+ 6. Fuel system
+ 7. An exhaust system
+ 8. Systems of start, ignition
+ 9. Transmission
+ 10. Brake system
+ 11. Suspension brackets, a steering
+ 12. A body
+ 13. An electric equipment
+ 14. A good advice


9df16362

3.1.2.2. Technical characteristics
THE GENERAL DATA

General characteristics

Engine code
2226 sm3, инжекторная system Motronic, 169 kw
AAN
2309 sm3, инжекторная system Bosch KEIII Jetronic, 98 kw
AАR
Diameter of the cylinder
82,5 mm
Piston stroke
86,4 mm
Compression degree
10,0:1
Pressure of compression
8,0 bar
The maximum difference of pressure between cylinders
3,0 bar
Operating procedure of cylinders
1–2–4–5–3
Cylinder N1 arrangement
From outside газораспределительного a belt
Greasing system:
Type of the oil pump
It is fixed in a forward part of the block of cylinders and receives a drive from a cranked shaft
Nominal pressure of oil
2,0 bar a minimum (2000 rpm, temperature of oil 80 )

The moments of an inhaling of carving connections

Bolts and nuts of a cover of a rod:
 – A step 1
30
 – A step 2
Tighten for 90
Bolts of a cover of the bearing of a camshaft
20
Bolts of a cover of a camshaft:
 – A step 1
5
 – A step 2
10
 – A step 3
12
Bolt of an asterisk of a camshaft
65
The ventilating channel картера the engine
20
Bolt of an asterisk and pulley of a cranked shaft
450
Bolts, fastening a pulley and the shock-absorber of a cranked shaft to an asterisk
20
Bolts of a casing of a back epiploon of a cranked shaft:
 – М6
10
 – М8
20
Oil jet of the cylinder
10
Bolts of a head of cylinders:
 – A step 1
40
 – A step 2
60
 – A step 3
Tighten for 180
Bolts of support of the engine
45
Bolts, fastening an exhaust pipe to a collector
40
Bolts of a final collector
25
Flywheel bolts:
 – A standard flywheel:
   • cтупень 1
30
   • cтупень 2
Tighten for 90
Flywheel, two-piece:
 – cтупень 1
40
 – cтупень 2
Tighten for 180
Bolts, fastening a plate of the gauge of the Hall to an inlet collector
25
Bolts, fastening the Hall gauge to a head of cylinders
10
Bolts of a cover of the radical bearing
65
Bolts of an inlet collector
20
The oil filter
25
Maslozabornyj branch pipe
10
Bolts, fastening the oil pump to the block of cylinders
The short
10
The long
20
Bolts of the oil pallet:
 – М6
10
 – М8
20
Заглушка the oil pallet
40
Bolts of support of the engine
40
Bolts of covers газораспределительного a belt
10
Bolts натяжителя газораспределительного a belt
20
The fan
20