Audi 100/A6

1990-1997 of release

Repair and car operation



Audi 100/A6
+ 1. The maintenance instruction
+ 2. Maintenance service
+ 3. Engines
+ 3.2. Diesel engines
+ 3.3. Removal and a partition of engines
+ 4. Cooling system
+ 5. Heating and ventilation
+ 6. Fuel system
+ 7. An exhaust system
+ 8. Systems of start, ignition
+ 9. Transmission
+ 10. Brake system
+ 11. Suspension brackets, a steering
- 12. A body
   12.2. Maintenance service and repair
   12.3. A forward bumper
   12.4. A back bumper
   12.5. A cowl
   + 12.6. A rope of opening of a cowl
   12.7. The cowl lock
   12.8. Doors
   12.9. The internal panel of furnish of a door
   12.10. A frame of a window of a door
   12.11. The handle of a door and lock elements
   12.12. Glass and window lifter
   12.13. A luggage carrier cover
   12.14. Elements of the lock of a cover of a luggage carrier
   12.15. A back door
   12.16. Elements of the lock of a back door
   12.17. Elements of the central lock
   + 12.18. Elements electric Glass lifts
   12.19. Rear-view mirrors and the elements connected with them
   12.20. Front and back glass
   12.21. The top hatch
   12.22. External elements of furnish of a body
   12.23. Sitting
   12.24. The mechanism of a tension of forward seat belts
   12.25. Elements of seat belts
   12.26. Panels of furnish of salon
   12.27. The central console
   12.28. The panel of devices
+ 13. An electric equipment
+ 14. A good advice


9df16362

12.27. The central console

Removal
PERFORMANCE ORDER
1. Remove a fixing clip and remove the handle from the lever of a manual brake.
2. Remove the furnish panel.
3. Turn off the forward and back fixing screw.
4. Remove a ventilating lattice.
5. Remove the furnish panel.
6. Remove the handle and a cover of the lever of a gear change.
7. Turn off fixing screws.
8. Remove back section of the central console.
9. Remove a ventilating lattice.
10. Remove заглушки (are specified by arrows in drawing at the left) and turn off fixing screws (are specified by arrows in drawing on the right).
11. Remove handles, turn off fixing screws and remove the panel of adjustment of temperature.
12. Turn off fixing screws (are specified by arrows) and remove an ashtray.
13. Turn off fixing screws (are specified by arrows) and remove forward section of the central console.

Installation

Installation is spent upside-down removals.