Audi 100/A6

1990-1997 of release

Repair and car operation

Audi 100/A6
+ 1. The maintenance instruction
+ 2. Maintenance service
+ 3. Engines
+ 3.2. Diesel engines
+ 3.3. Removal and a partition of engines
+ 4. Cooling system
+ 5. Heating and ventilation
+ 6. Fuel system
+ 7. An exhaust system
+ 8. Systems of start, ignition
+ 9. Transmission
+ 10. Brake system
+ 11. Suspension brackets, a steering
- 12. A body
   12.2. Maintenance service and repair
   12.3. A forward bumper
   12.4. A back bumper
   12.5. A cowl
   + 12.6. A rope of opening of a cowl
   12.7. The cowl lock
   12.8. Doors
   12.9. The internal panel of furnish of a door
   12.10. A frame of a window of a door
   12.11. The handle of a door and lock elements
   12.12. Glass and window lifter
   12.13. A luggage carrier cover
   12.14. Elements of the lock of a cover of a luggage carrier
   12.15. A back door
   12.16. Elements of the lock of a back door
   12.17. Elements of the central lock
   + 12.18. Elements electric Glass lifts
   12.19. Rear-view mirrors and the elements connected with them
   12.20. Front and back glass
   12.21. The top hatch
   12.22. External elements of furnish of a body
   12.23. Sitting
   12.24. The mechanism of a tension of forward seat belts
   12.25. Elements of seat belts
   12.26. Panels of furnish of salon
   12.27. The central console
   12.28. The panel of devices
+ 13. An electric equipment
+ 14. A good advice

12.25. Elements of seat belts
SEAT BELTS OF FORWARD SEATS (MODEL AUDI 100)

Removal

PERFORMANCE ORDER

1. Remove decorative strips and turn off fixing screws (are specified by arrows) panels of furnish of a rack of a body.

2. Remove the panel of furnish of a rack of a body.

3. Turn off fixing screws and remove the bottom panel of furnish.

4. Disconnect a rope of system "Progame-ten" from натяжителя.

5. Turn off the bottom fixing bolt of a seat belt.

6. Turn off fixing screws (are specified by arrows in drawing at the left) and remove the top panel of furnish (the fixing clip is specified by an arrow on ривунке on the right).

7. Turn off a nut of the top fastening.

8. Turn off a fixing bolt of a tension drum and remove a seat belt.

Installation

Installation is spent upside-down removals.

SEAT BELTS OF FORWARD SEATS (MODEL AUDI А6)

Removal

PERFORMANCE ORDER

1. Disconnect a socket of connection from натяжителя.

2. Turn off the bottom fixing bolt of a seat belt.

3. Turn off fixing screws (are specified by arrows in drawing at the left) and remove the top panel of furnish (the fixing clip is specified by an arrow on ривунке on the right).

4. Turn off a nut of the top fastening.

5. Turn off fixing screws (are specified by arrows in drawing at the left) and remove the top panel of furnish (the fixing clip is specified by an arrow on ривунке on the right).

6. Turn off a nut of the top fastening.

7. Disconnect a socket of connection of the gauge of the alarm system.

Installation

Installation is spent upside-down removals.

PERFORMANCE ORDER

1. Establish a uvula of a tension drum in cut on a body rack (it is specified by an arrow).

2. Tighten a fixing bolt till the demanded moment of an inhaling.

LATERAL SEAT BELT (MODELS WITH THE BODY OF TYPE "SEDAN")

Removal

PERFORMANCE ORDER

1. Remove back dynamics.

2. Remove back sitting.

3. Remove a back shelf.

4. Turn off a fixing bolt of a tension drum and remove a belt.

Installation

Installation is spent upside-down removals.

LATERAL SEAT BELT (MODELS WITH THE BODY OF TYPE "VERSATILE PERSON")

Removal

PERFORMANCE ORDER

1. Turn off the bottom fixing bolt.

2. Turn off fixing screws and remove a belt latch.

3. Remove a headrest and directing plugs.

4. Unbend a sitting material.

5. Divide halves of a buckle of a belt and extend a belt outside.

6. Turn off a fixing bolt of a tension drum and remove a seat belt.

Installation

Installation is spent upside-down removals.

THE CENTRAL SEAT BELT OF BACK SITTING AND BUCKLE

Removal

PERFORMANCE ORDER

1. Remove a sitting pillow.

2. Turn off a fixing bolt and remove a belt / a buckle.

Installation

Installation is spent upside-down removals.