Audi 100/A6

1990-1997 of release

Repair and car operation



Audi 100/A6
+ 1. The maintenance instruction
+ 2. Maintenance service
+ 3. Engines
+ 3.2. Diesel engines
+ 3.3. Removal and a partition of engines
+ 4. Cooling system
+ 5. Heating and ventilation
+ 6. Fuel system
+ 7. An exhaust system
+ 8. Systems of start, ignition
+ 9. Transmission
- 10. Brake system
   + 10.1.2. Shock-absorbers
   - 10.2. Technical characteristics
      10.2.2. Back shock-absorbers
      10.2.3. Back springs
      + 10.2.4. Semiaxes
   10.3. Prorolling of hydraulic system
   10.4. Hydraulic tubes and hoses
   10.5. Brake overlays of forward brakes
   10.6. Brake overlays of back wheels
   10.7. Brake Pads back brakes
   10.8. A brake disk of a forward wheel
   10.9. A brake disk of a back wheel
   10.10. A brake drum of a back brake
   10.11. A support of a forward brake
   10.12. A support of a back brake
   10.13. The wheel cylinder of a back brake
   10.14. The main brake cylinder
   10.15. A brake pedal
   10.16. The vaakuumnyj amplifier
   10.17. The vacuum valve of a servoamplifier
   10.18. A rope of a manual brake
   10.19. The lever of a manual brake
   10.20. The valve of adjustment of pressure in a contour of back brakes (till 96 of century)
   10.21. The switch of fires of a stoplight
   10.22. The general description of system of antiblocking of brakes (ABS)
   10.23. System ABS elements
   10.24. The vacuum pump (diesel and petrol engines in volume 2,3)
+ 11. Suspension brackets, a steering
+ 12. A body
+ 13. An electric equipment
+ 14. A good advice


9df16362

10.2. Technical characteristics
THE GENERAL DATA

Forward brakes

Type
Disk, with an one-piston mobile support
Diameter of a brake disk
288 mm
Thickness of a disk:
  – Continuous disks:
     • the new
15 mm
     • a deterioration limit
13 mm
  – Ventilated disks:
     • the new
25 mm
     • a deterioration limit
23 mm
As much as possible admissible palpation of a disk
0,05 mm
Thickness of a frictional material of brake overlays:
  – The new
14 mm
  – A deterioration limit
2 mm

Back drum-type brakes

Internal diameter of a brake drum:
  – The new
230 mm
  – A deterioration limit
231 mm
Thickness of a frictional material brake колодок:
  – The new
5,25 mm
  – A deterioration limit
2,50 mm
As much as possible admissible palpation of a brake drum
0,07 mm
Back disk brakes:
  – Diameter of a brake disk
245 mm
  – A thickness of a brake disk:
     • the new
10 mm
     • a deterioration limit
8 mm
As much as possible admissible palpation of a brake disk
0,05 mm
Is minimum admissible thickness of brake overlays
7 mm

The moments of an inhaling carving, Н m.

Fixing nuts of hydraulic module ABS
8
Supports of brakes of forward wheels:
  – Support fingers
25
  – Bolts of a fixing arm
125
  – A bolt of a fixing arm of a brake hose / of wires
25
  – Nuts of connections of brake tubes
15
  – Fixing nuts of the main brake cylinder
25
  – Nuts of a fixing arm of a pedal of a brake / of the vacuum amplifier *
25
  – A nut of fastening of a spring of the valve of adjustment of pressure
20
Supports of brakes of back wheels:
  – Support fingers *
35
  – A fixing bolt
65
  – Fixing bolts of the wheel cylinder
10
  – Bolts of fastening of wheels
110

* Use new nuts and bolts